Exhaust Fitting
Show/hide table
| 图 1 | g01269533 |
按照以下步骤拧紧卡箍组件 (1) ：
注: 组装前，将 4C-5599 防咬合剂 涂抹在卡箍组件的螺纹、轴承表面和内径上。
- 拧紧卡箍组件至扭矩为 12 ± 2 N·m (105 ± 18 lb in)。
- 用软锤轻敲卡箍组件的周围。
- 再次拧紧卡箍组件至扭矩为 12 ± 2 N·m (105 ± 18 lb in)。
Caterpillar Information System:
G3500B Engines Engine Sensors
G3500B Engines Electronic Control System Parameters
390F MHPU Mobile Hydraulic Power Unit Alternate Exit
G3500B Engines Electronic Control Module (ECM)
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562} Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
TH48-E70 Petroleum Transmission Transmission Warm-up
G3500B Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547} Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547}
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Remove
2008/09/29 Serial Number Plate {1000, 7557}
3512B Engine Configuration Parameters
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Grease Lines
C175-16 and C175-20 Engines for Off-Highway Trucks Exhaust Manifold
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Install
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Rear)
3512B Engine Product Lifting
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Operator Console - Remove and Install
3512B Engine Engine Crankcase Breather - Clean
2008/12/08 A New Cat Compression Brake Is Available. {1119, 1129}
3000 Frame SR5 Electric Power Generation Exciter - Remove and Install
3000 Frame SR5 Electric Power Generation Bearing - Remove and Install - Rear Bearing - Remove and Install
3000 Frame SR5 Electric Power Generation Bus Bar - Remove and Install