Serial Number Plate {1000, 7557}
- Industrial Engine:
- C3.4 IND (S/N: CJR346-355,357-367,405-897)
Show/hide table
 | |
| Illustration 1 | g01648199 |
Typical example | |
Incorrect serial number plates are mounted to the listed C3.4 engines. The plates are manufactured with too many zero's in the section for the engine serial number (1). Refer to illustration 1.
The correct engine serial number (2) is stamped into the engine block. Refer to illustration 1.
If the engine serial number is used from the serial number plate, the first zero should be ignored.
Caterpillar Information System:
3512B Engine Configuration Parameters
Filtration Procedure For Cold Planer Hydraulic Oil {0680, 0738, 0768, 5050, 5056} Filtration Procedure For Cold Planer Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
2008/10/01 Diagnostic Code Occurring on C11 and C13 On-Highway Engines {1901, 1920}
G3600 Engines Welding Precaution
3412, 3412C, and 3412E Generator Set Engines Speed Control (PWM) - Test
Clean Gas Induction (CGI) Line Upgrade{1061, 1087, 108N} Clean Gas Induction (CGI) Line Upgrade{1061, 1087, 108N}
Procedure for Powering the Battery Charger Continuously{751B} Procedure for Powering the Battery Charger Continuously{751B}
3412, 3412C, and 3412E Generator Set Engines Fuel Rack Position Sensor - Calibrate
3512B Generator Set Engine Configuration Parameters
3412, 3412C, and 3412E Generator Set Engines Speed Control - Test
3500B Engines Auxiliary Water Pump - Assemble - Auxiliary Pump (Type 2)
3512B Generator Set Engine Event Codes
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Install
Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547} Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547}
G3500B Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
TH48-E70 Petroleum Transmission Transmission Warm-up
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562} Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
G3500B Engines Electronic Control Module (ECM)
390F MHPU Mobile Hydraulic Power Unit Alternate Exit
G3500B Engines Electronic Control System Parameters
G3500B Engines Engine Sensors
C175-16 Locomotive Engine Exhaust Fitting
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Grease Lines