330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Caterpillar


Grease Lines

Usage:

330D L B6H



图 1g01650141

(1) 五只螺栓的扭矩 ... 30 ± 7 N·m (22 ± 5 lb ft)

(2) 六只螺母的扭矩 ... 30 ± 7 N·m (22 ± 5 lb ft)

Caterpillar Information System:

C175-16 Locomotive Engine Exhaust Fitting
G3500B Engines Engine Sensors
G3500B Engines Electronic Control System Parameters
390F MHPU Mobile Hydraulic Power Unit Alternate Exit
G3500B Engines Electronic Control Module (ECM)
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562} Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
TH48-E70 Petroleum Transmission Transmission Warm-up
G3500B Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547} Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547}
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Remove
2008/09/29 Serial Number Plate {1000, 7557}
C175-16 and C175-20 Engines for Off-Highway Trucks Exhaust Manifold
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Install
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Rear)
3512B Engine Product Lifting
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Operator Console - Remove and Install
3512B Engine Engine Crankcase Breather - Clean
2008/12/08 A New Cat Compression Brake Is Available. {1119, 1129}
3000 Frame SR5 Electric Power Generation Exciter - Remove and Install
3000 Frame SR5 Electric Power Generation Bearing - Remove and Install - Rear Bearing - Remove and Install
3000 Frame SR5 Electric Power Generation Bus Bar - Remove and Install
3000 Frame SR5 Electric Power Generation Rotor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.