Operator Console - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | FT-2674 | 真空舱 | 1 |
开始:
- 拆下座椅。 请参阅拆解和组装, "座椅 - 拆卸"。
注: 为便于安装，在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。
- 拆下板 (1) 和 (2) 。
Show/hide table
 | |
| 图 1 | g01208165 |
- 将工具 (A) 和供气连接到液压油箱。 对工具 (A) 施加 345 ± 70 kPa (50 ± 10 psi) 的压力。
Show/hide table
 | |
| 图 2 | g01196137 |
- 断开软管组件 (3) 和 (4) 。
Show/hide table
 | |
| 图 3 | g01650893 |
- 断开线束组件 (5) 。
Show/hide table
 | |
| 图 4 | g01208198 |
- 断开线束组件 (6) 。
Show/hide table
 | |
| 图 5 | g01208202 |
- 拆下板 (8) 。 向驾驶室的前部移动地板垫 (7) 。
Show/hide table
 | |
| 图 6 | g01208204 |
- 从操作员控制台的两侧拆下螺栓 (9) 。 将软管组件 (3) 和 (4) 通过驾驶室的地板拉出。 将线束组件 (5) 和 (6) 通过驾驶室地板拉出。 线束组件 (5) 和 (6) 已在步骤 4 和 5 中拆下。
注: 如果机器配有无线电，将需要断开天线。
Show/hide table
 | |
| 图 7 | g01208208 |
- 断开线束组件 (10) 。
Show/hide table
 | |
| 图 8 | g01208250 |
- 拆下螺栓 (11) 和操作员控制台 (12) 。
Show/hide table
 | |
| 图 9 | g01208252 |
Caterpillar Information System:
3512B Engine Product Lifting
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Rear)
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Remove
C175-16 and C175-20 Engines for Off-Highway Trucks Exhaust Manifold
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Grease Lines
C175-16 Locomotive Engine Exhaust Fitting
G3500B Engines Engine Sensors
G3500B Engines Electronic Control System Parameters
390F MHPU Mobile Hydraulic Power Unit Alternate Exit
G3500B Engines Electronic Control Module (ECM)
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562} Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
3512B Engine Engine Crankcase Breather - Clean
2008/12/08 A New Cat Compression Brake Is Available. {1119, 1129}
3000 Frame SR5 Electric Power Generation Exciter - Remove and Install
3000 Frame SR5 Electric Power Generation Bearing - Remove and Install - Rear Bearing - Remove and Install
3000 Frame SR5 Electric Power Generation Bus Bar - Remove and Install
3000 Frame SR5 Electric Power Generation Rotor - Remove and Install
G3500B Engines Engine Monitoring System
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405} Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
3512B Engine Air Shutoff - Test
G3500B Engines Air Inlet and Exhaust System Components
3512B Engine Auxiliary Water Pump - Inspect
Electrical Application and Installation Guide for the CX31-P600 and CX35-P800 Petroleum Transmissions {1400, 3030} Electrical Application and Installation Guide for the CX31-P600 and CX35-P800 Petroleum Transmissions {1400, 3030}