A New Cat Compression Brake Is Available. {1119, 1129}
- Industrial Engine:
- C15 (S/N: JRE1-UP)
Description of Change: A new Cat compression brake is available on the engines that are listed above. The Cat compression brake is an improvement over the current brake.
Adaptable To:
Show/hide table
Engine arrangements that are adaptable to use Cat compression brake.     | ||
Serial Number     | Horsepower     | Engine Arrangement     |
S/N:JRE00001-7495     | 475     | 300-4940 and 241-0020     |
S/N:JRE00001-7495     | 440     | 300-4941 and 254-3832     |
The Cat compression brake is an option that is available on the engines that are listed in Table 1.
ReferenceDisassembly and Assembly, RENR8630
Note: The Cat compression brake is not adaptable to engine arrangement 254-3835 Engine Arrangement with a "C, D and E" Tier III rating.
Show/hide table
475 HP     | |||
S/N:JRE00001-7495     | |||
Engine Arrangement     | 300-4940     | 241-0020     | 241-0020     |
Camshaft Group     | 234-7935     | 234-7935     | 234-7935     |
24 Volt Actuator Assembly     | 239-9624     | 239-9624     | 239-9624     |
12 Volt Actuator Assembly     | 269-6798     | 269-6798     | 269-6798     |
Note     | Replace studs with nine 304-9553 Studs and three 234-9508 Bolts when the compression brake is installed.     | Replace studs with nine 304-9553 Studs and three 234-9508 Bolts if the compression brake is installed.     | |
Valve Mechanism Group     | 266-3369     | 190-0009     | 266-3699     |
Injector Rocker Arm     | 278-1363     | 278-1365     | 278-1363     |
Exhaust Rocker Arm     | 320-2795     | 320-2797     | 320-2795     |
Note     | Both rocker arms are compatible with the camshaft group if the brake is installed.     | Both rocker arms must be replaced with 278-1363 Rocker Arm and 320-2795 Rocker Arm if the compression brake is installed.     | Both rocker arms are compatible with the camshaft group if the brake is installed.     |
Fastener group for the rocker arm shaft assembly     | No new bolts are required.     | 109-1657     | 109-1657     |
Valve cover     | 234-5005     | 278-5662     | 234-5005     |
Wiring Harness Assembly     | 307-1610     | 278-5662     | 307-1610     |
Note     | The wiring harness will be compatible if the compression brake is used.     | The wiring harness must be replaced with 307-1610 Engine Harness As if the compression brake is installed.     | The wiring harness will be compatible if the compression brake is used.     |
Show/hide table
440 HP     | |||
S/N:JRE1-7495     | |||
Engine Arrangement     | 300-4941     | 254-3832     | 254-3832     |
Camshaft Group     | 234-7935     | 234-7935     | 234-7935     |
24 Volt Actuator Assembly     | 239-9624     | 239-9624     | 239-9624     |
12 Volt Actuator Assembly     | 269-6798     | 269-6798     | 269-6798     |
Note     | Replace studs with nine 304-9553 Studs and three 234-9508 Bolts if the compression brake is installed.     | Replace studs with nine 304-9553 Studs and three 234-9508 Bolts if the compression brake is installed.     | |
Valve Mechanism Group     | 266-3699     | 190-0009     | 266-3699     |
Injector Rocker Arm     | 278-1363     | 278-1365     | 278-1363     |
Exhaust Rocker Arm     | 320-2795     | 320-2797     | 320-2795     |
Note     | Both rocker arms are compatible with the camshaft group if the brake is installed.     | Both rocker arms must be replaced with 278-1363 Rocker Arm and 320-2795 Rocker Arm if the compression brake is installed.     | Both rocker arms are compatible with the camshaft group if the brake is installed.     |
Fastener group for the rocker arm shaft assembly     | No new bolts are required.     | 109-1657     | 109-1657     |
Valve cover     | 234-5005     | 278-5662     | 234-5005     |
Wiring Harness Assembly     | 307-1610     | 307-1611     | 307-1610     |
Note     | The wiring harness will be compatible if the compression brake is used.     | The wiring harness must be replaced with 307-1610 Engine Harness As if the compression brake is installed.     | The wiring harness will be compatible if the compression brake is used.     |
Note: Refer to Table 2 and Table 3 for adaptability of the engine parts.
Caterpillar Information System:
3512B Engine Engine Crankcase Breather - Clean
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Operator Console - Remove and Install
3512B Engine Product Lifting
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Rear)
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Piston Motor (Hydraulic Fan) - Remove
C175-16 and C175-20 Engines for Off-Highway Trucks Exhaust Manifold
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Grease Lines
C175-16 Locomotive Engine Exhaust Fitting
G3500B Engines Engine Sensors
G3500B Engines Electronic Control System Parameters
390F MHPU Mobile Hydraulic Power Unit Alternate Exit
3000 Frame SR5 Electric Power Generation Exciter - Remove and Install
3000 Frame SR5 Electric Power Generation Bearing - Remove and Install - Rear Bearing - Remove and Install
3000 Frame SR5 Electric Power Generation Bus Bar - Remove and Install
3000 Frame SR5 Electric Power Generation Rotor - Remove and Install
G3500B Engines Engine Monitoring System
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405} Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
3512B Engine Air Shutoff - Test
G3500B Engines Air Inlet and Exhaust System Components
3512B Engine Auxiliary Water Pump - Inspect
Electrical Application and Installation Guide for the CX31-P600 and CX35-P800 Petroleum Transmissions {1400, 3030} Electrical Application and Installation Guide for the CX31-P600 and CX35-P800 Petroleum Transmissions {1400, 3030}
3412, 3412C, and 3412E Generator Set Engines Sensor Signal (Analog, Active) - Test
C13, C15, and C18 Tier 4 Final Engines Cylinder Liner