Air Starting Motor - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Shut off the air supply at the air reservoir. Drain the pressurized air from the air starting system. The sudden release of pressurized air can cause personal injury. |
- Turn OFF the air supply at the air reservoir. Ensure that the air pressure is drained from the starting air system.
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information.
- Disconnect tube assembly (1) from the air starting motors. Move the tube assembly away from the air starting motors.
Show/hide table
Illustration 1 | g00538622 |
- Disconnect hose assembly (2) and hose assembly (3) from the starter pinion nose housing.
- Attach a suitable lifting device to air starting motor (4). The weight of air starting motor (4) is approximately 54 kg (120 lb). Remove the bolts that hold air starting motor (4) in place. Remove air starting motor (4) .
Caterpillar Information System:
3176C, 3406E and 3456 Industrial Engines Electrical Power Supply - Test
2008/12/08 Procedure for Cleaning the Power Train {3065, 3139}
3608 Engine Valve Lifter - Install
2007/12/03 Cylinder Head Gasket {1100, 1251}
3176C, 3406E and 3456 Industrial Engines Oil Pressure Is Low
3608 Engine Fuel Transfer Pump - Assemble
3176C, 3406E and 3456 Industrial Engines Intake Manifold Air Temperature Is High
3608 Engine Governor Drive - Assemble - Earlier
3176C, 3406E and 3456 Industrial Engines Fuel Temperature Is High
3176C, 3406E and 3456 Industrial Engines Fuel Pressure Problem
G3500 Engines Nitrogen Oxide Sensor - Calibrate
C15 and C18 Petroleum Engines Engine Design
3608 Engine Water Pump - Disassemble
3608 Engine Auxiliary Water Pump - Remove
3608 Engine Auxiliary Water Pump - Disassemble
2008/01/01 Use the Correct Fittings for the Fuel Manifold {1274, 1380}
3608 Engine Fuel Transfer Pump - Remove
3608 Engine Fuel Pressure Control Valve - Remove
3608 Engine Fuel Pressure Control Valve - Disassemble
3608 Engine Governor Drive - Disassemble - Earlier
3608 Engine Governor Drive - Disassemble - Later
3608 Engine Engine Oil Pump - Remove
C7 Petroleum Engine Safety Messages
3608 Engine Priority Valve - Remove