Engine Design
Show/hide table
| |
| Illustration 1 | g01096864 |
|
Cylinder and valve location (A) Inlet (B) Exhaust (C) Flywheel end of engine | |
Bore ...
Stroke ...
Displacement ...
Cylinder arrangement ... In-Line
Valves per cylinder ... 4
The adjustment for the inlet valve lash is the following value. ...
The adjustment for the exhaust valve lash is the following value. ...
Firing order (injection sequence) ... 1, 5, 3, 6, 2, 4
Crankshaft rotation ... counterclockwise
Note: The front end of the engine is opposite the flywheel end. The left side and the right side of the engine are viewed from the flywheel end. The No. 1 cylinder is the front cylinder.
Caterpillar Information System:
C15 and C18 Petroleum Engines Turbocharger Oil Lines
G3500B Engines Nitrogen Oxide Sensor - Calibrate
Manual Programming of a UPS System{4480, 7620} Manual Programming of a UPS System{4480, 7620}
Procedure for Using the Automatic Flash Update Tool for a UPS System{4480, 7620} Procedure for Using the Automatic Flash Update Tool for a UPS System{4480, 7620}
G3520C and G3520E Engines Turbocharger
Procedure to Relocate the Inlet Hose for the ARD Purge Air Pump{107P, 1803} Procedure to Relocate the Inlet Hose for the ARD Purge Air Pump{107P, 1803}
C15 and C18 Petroleum Engines Turbocharger Oil Lines
3608 Engine Valve Lifter - Assemble
2007/11/01 Replacement of the Combustion Head for the Aftertreatment Regeneration Device in On-highway Engines {1088, 1720, 1722}
C15 and C18 Petroleum Engines Turbocharger Oil Lines
C15 and C18 Petroleum Engines Turbocharger Oil Lines
3176C, 3406E and 3456 Industrial Engines Coolant Temperature Is High
G3500 Engines Nitrogen Oxide Sensor - Calibrate
3176C, 3406E and 3456 Industrial Engines Fuel Pressure Problem
3176C, 3406E and 3456 Industrial Engines Fuel Temperature Is High
3608 Engine Governor Drive - Assemble - Earlier
3176C, 3406E and 3456 Industrial Engines Intake Manifold Air Temperature Is High
3608 Engine Fuel Transfer Pump - Assemble
3176C, 3406E and 3456 Industrial Engines Oil Pressure Is Low
2007/12/03 Cylinder Head Gasket {1100, 1251}
3608 Engine Valve Lifter - Install
2008/12/08 Procedure for Cleaning the Power Train {3065, 3139}
3176C, 3406E and 3456 Industrial Engines Electrical Power Supply - Test
3608 Engine Air Starting Motor - Remove