Valve Lifter - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Put valve lifter group (3) in position and install bolts (4) .
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information.
Show/hide table
 | |
| Illustration 1 | g00639217 |
- Install oil supply tube (2) .
- Make sure that the O-ring seal is in good condition. Make sure that the O-ring seal is in position in cover (1) and install the cover.
Show/hide table
 | |
| Illustration 2 | g00639215 |
End By: Install the valve mechanism. Refer to Disassembly and Assembly, "Valve Mechanism - Install".
Caterpillar Information System:
2007/12/03 Cylinder Head Gasket {1100, 1251}
3176C, 3406E and 3456 Industrial Engines Oil Pressure Is Low
3608 Engine Fuel Transfer Pump - Assemble
3176C, 3406E and 3456 Industrial Engines Intake Manifold Air Temperature Is High
3608 Engine Governor Drive - Assemble - Earlier
3176C, 3406E and 3456 Industrial Engines Fuel Temperature Is High
3176C, 3406E and 3456 Industrial Engines Fuel Pressure Problem
G3500 Engines Nitrogen Oxide Sensor - Calibrate
C15 and C18 Petroleum Engines Engine Design
C15 and C18 Petroleum Engines Turbocharger Oil Lines
G3500B Engines Nitrogen Oxide Sensor - Calibrate
Manual Programming of a UPS System{4480, 7620} Manual Programming of a UPS System{4480, 7620}
2008/12/08 Procedure for Cleaning the Power Train {3065, 3139}
3176C, 3406E and 3456 Industrial Engines Electrical Power Supply - Test
3608 Engine Air Starting Motor - Remove
3608 Engine Water Pump - Disassemble
3608 Engine Auxiliary Water Pump - Remove
3608 Engine Auxiliary Water Pump - Disassemble
2008/01/01 Use the Correct Fittings for the Fuel Manifold {1274, 1380}
3608 Engine Fuel Transfer Pump - Remove
3608 Engine Fuel Pressure Control Valve - Remove
3608 Engine Fuel Pressure Control Valve - Disassemble
3608 Engine Governor Drive - Disassemble - Earlier
3608 Engine Governor Drive - Disassemble - Later