Fuel Pressure Control Valve - Disassemble
Disassembly Procedure
Start By:
- Remove the fuel pressure control valve. Refer to Disassembly and Assembly, "Fuel Pressure Control Valve - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Loosen the locknut and remove setscrew (6) from plate (5) .
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information.
Show/hide table
Illustration 1 | g00624682 |
Show/hide table
Personal injury can result from parts and/or covers under spring pressure. Spring force will be released when covers are removed. Be prepared to hold spring loaded covers as the bolts are loosened. |
- Remove the bolts and plate (5) from body (1) .
- Remove retainer (4), spring (3), and valve (2) from body (1) .
- Remove the O-ring seal from retainer (4) .
Caterpillar Information System:
3608 Engine Fuel Pressure Control Valve - Remove
3608 Engine Fuel Transfer Pump - Remove
2008/01/01 Use the Correct Fittings for the Fuel Manifold {1274, 1380}
3608 Engine Auxiliary Water Pump - Disassemble
3608 Engine Auxiliary Water Pump - Remove
3608 Engine Water Pump - Disassemble
3608 Engine Air Starting Motor - Remove
3176C, 3406E and 3456 Industrial Engines Electrical Power Supply - Test
2008/12/08 Procedure for Cleaning the Power Train {3065, 3139}
3608 Engine Valve Lifter - Install
2007/12/03 Cylinder Head Gasket {1100, 1251}
3176C, 3406E and 3456 Industrial Engines Oil Pressure Is Low
3608 Engine Governor Drive - Disassemble - Earlier
3608 Engine Governor Drive - Disassemble - Later
3608 Engine Engine Oil Pump - Remove
C7 Petroleum Engine Safety Messages
3608 Engine Priority Valve - Remove
3608 Engine Priority Valve - Disassemble
C15 and C18 Petroleum Engines Fuel Priming Pump
C15 and C18 Petroleum Engines Fuel Priming Pump
C15 and C18 Petroleum Engines Fuel Priming Pump
C9 Petroleum Engine Safety Messages
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System MID 039 - CID 0167 - FMI 12
G3500 Engines Engine Oil Lines