Recoil Spring - Remove and Install
Removal Procedure
Start By:
- Remove the hydraulic track adjusters. Refer to Disassembly and Assembly, "Hydraulic Track Adjusters - Remove".
- Remove two bolts (1) from each stop (2) .
Show/hide table
Illustration 1 | g00399818 |
- Remove stops (2) from the track roller frame.
- Attach an appropriate lifting device and a hoist to recoil spring (3) .
- Remove the recoil spring (3). The weight of the recoil spring is 135 kg (300 lb).
- Repeat Steps 1 through 4 for the left side of the machine.
Installation Procedure
- Attach an appropriate lifting device and a hoist to recoil spring (3) .
Show/hide table
Illustration 2 | g00399818 |
- Position recoil spring (3) in the track roller frame. The weight of the recoil spring is 135 kg (300 lb).
- Install two stops (2) .
- Install bolts (1) .
- Repeat Steps 1 through 4 for the left side of the machine.
End By: Install the hydraulic track adjusters. Refer to Disassembly and Assembly, "Hydraulic Track Adjusters - Install".
Caterpillar Information System:
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Assemble
Field Installation of Decelerator Pedal{1276} Field Installation of Decelerator Pedal{1276}
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Disassemble
854G Wheel Dozer Machine Systems Front Frame and Rear Frame - Connect
854G Wheel Dozer Machine Systems Front Frame and Rear Frame - Separate
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Disassemble
966G Wheel Loader and 972G Wheel Loader Machine Systems Lift Arms - Install
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Install
613C Series II Wheel Tractor-Scraper Machine Systems Check Valve (Floor) - Remove
3306B Industrial Engine Electric Starting Motor
613C Series II Wheel Tractor-Scraper Machine Systems Floor Roller - Assemble
G3304 and G3306 Engines Electric Starting Motor
994D Wheel Loader Power Train Speed Sensor (Torque Converter Output)
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Assemble
D6G Track-Type Tractor Power Train Recoil Spring - Disassemble
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Electronic Control Module (ECM) - Replace
994D Wheel Loader Power Train Modulating Valve (Torque Converter Impeller Clutch)
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake - Install
627F Wheel Tractor-Scraper Cooling System Coolant (ELC) - Change
854G Wheel Dozer Machine Systems Gear Pump (Implement Pilot) - Remove
854G Wheel Dozer Machine Systems Gear Pump (Implement Pilot) - Install
D6G Track-Type Tractor Power Train Recoil Spring - Assemble
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Remove