Parking Brake - Remove
Removal Procedure
- Park the machine on a flat, level surface. Lower the scraper bowl to the ground. Chock the wheels in order to prevent the machine from rolling when the parking brake is released.
- Remove cotter pin (1) and clevis pin (2) from yoke rod end (3) . Remove eight bolts (4) and brake drum (5) from flange (6) .
Show/hide table
 | |
| Illustration 1 | g00400076 |
- Remove bolt (7) , washer (8) and flange (6) from parking brake assembly (9) .
Show/hide table
 | |
| Illustration 2 | g00400118 |
- Remove four bolts (10) and parking brake assembly (9) from the transmission case.
Show/hide table
 | |
| Illustration 3 | g00400119 |
Caterpillar Information System:
994D Wheel Loader Power Train Modulating Valve (Torque Converter Impeller Clutch)
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Electronic Control Module (ECM) - Replace
D6G Track-Type Tractor Power Train Recoil Spring - Disassemble
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Assemble
994D Wheel Loader Power Train Speed Sensor (Torque Converter Output)
D6G Track-Type Tractor Power Train Recoil Spring - Remove and Install
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Assemble
Field Installation of Decelerator Pedal{1276} Field Installation of Decelerator Pedal{1276}
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Disassemble
854G Wheel Dozer Machine Systems Front Frame and Rear Frame - Connect
854G Wheel Dozer Machine Systems Front Frame and Rear Frame - Separate
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Disassemble
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake - Install
627F Wheel Tractor-Scraper Cooling System Coolant (ELC) - Change
854G Wheel Dozer Machine Systems Gear Pump (Implement Pilot) - Remove
854G Wheel Dozer Machine Systems Gear Pump (Implement Pilot) - Install
D6G Track-Type Tractor Power Train Recoil Spring - Assemble
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Remove
966G Wheel Loader and 972G Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Remove
D6G Track-Type Tractor Power Train Track Roller Frame - Remove
994D Wheel Loader Power Train Modulating Valve (Torque Converter Lockup Clutch)
966G Wheel Loader and 972G Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Install
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Install
D6G Track-Type Tractor Power Train Track Roller Frame - Install