Illustration 1 | g00450571 |
(1) Torque for the nut ... 12 ± 2 N·m (9 ± 1 lb ft)
(2) 135-2049 Spring
- Length under test force ... 11 mm (.43 inch)
- Test force ... 15 ± 1 N (3.4 ± .2 lb)
- Free length after test ... 14.8 mm (.58 inch)
- Outside diameter ... 4.57 ± 0.08 mm (.180 ± .003 inch)
- Test force ... 15 ± 1 N (3.4 ± .2 lb)
(3) Lubricate the O-ring with a minimal amount of the lubricant that is being sealed.
(4) Torque for installing the orifice ... 2 ± 1 N·m (18 ± 9 lb in)
(5) Torque for installing the nipple assembly ... 14 ± 4 N·m (10 ± 3 lb ft)
(6) 118-3731 Spring
- Length under test force ... 14.00 mm (.551 inch)
- Test force ... 36.0 ± 1.8 N (8.10 ± .40 lb)
- Free length after test ... 15.99 mm (.630 inch)
- Outside diameter ... 12.1 mm (.48 inch)
- Test force ... 36.0 ± 1.8 N (8.10 ± .40 lb)
(7) Apply 4C-9509 Sealant before installing the plug and the seal.
(8) Torque for installing the cartridge assembly ... 50 ± 5 N·m (37 ± 4 lb ft)
(9) Lubricate the O-ring with a minimal amount of the lubricant that is being sealed.
(10) Torque for installing the seat ... 19 ± 4 N·m (14 ± 3 lb ft)
Flow of SAE 30W oil at 1000 kPa (145 psi) pressure drop ... 65 L/min (17 US gpm)
Nominal coil voltage ... 12 VDC
Maximum coil voltage ... 14.5 VDC
Minimum coil voltage ... 10.7 VDC
Nominal coil resistance at 25°C (77°F) ... 7.75 ± 1.00 Ohms
Maximum coil resistance at 121°C (220°F) ... 12.68 Ohms
Minimum coil resistance at -40°C (-40°F) ... 5.81 Ohms
Nominal current draw at 25°C (77°F) ... 1.55 Amperes
Maximum current draw at -40°C (-40°F) ... 2.1 Amperes