Parking Brake Actuator - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0520     | Driver Group     | 1     |
B     | 1P-0510     | Driver Group     | 1     |
Start By:
- Remove the parking brake actuator. Refer to Disassembly and Assembly, "Parking Brake Actuator - Remove". The information is in this manual.
- Use Tool (A) and a press in order to press down on cover (1) . Remove eight bolts (2) from cylinder assembly (3) . Carefully release the spring pressure on cover (1) .
Show/hide table
Illustration 1 | g00399198 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove cover (1) from spring (4) . Remove spring (4) from cylinder assembly (3) .
Show/hide table
Illustration 2 | g00399199 |
- Mark the location of nut (5) on pushrod (6) for installation purposes. Loosen nut (5) . Remove yoke rod end (7) , nut (5) and dust boot (8) from pushrod (6) .
Show/hide table
Illustration 3 | g00399200 |
- Remove spacer sleeve (9) , nut (10) and flange nut (11 ) from pushrod (6) . Remove pushrod (6) from cylinder assembly (3) .
Show/hide table
Illustration 4 | g00399201 |
- Use Tool (B) and a press to remove piston assembly (12) from cylinder assembly (3) .
Show/hide table
Illustration 5 | g00399202 |
- Remove felt wiper seal (13) and O-ring seal (14) from piston assembly (12) .
Show/hide table
Illustration 6 | g00399203 |
- Remove seal (15) and O-ring seal (16) from cylinder assembly (3) .
Show/hide table
Illustration 7 | g00399204 |
Caterpillar Information System:
966G Wheel Loader and 972G Wheel Loader Machine Systems Lift Arms - Install
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Install
613C Series II Wheel Tractor-Scraper Machine Systems Check Valve (Floor) - Remove
3306B Industrial Engine Electric Starting Motor
613C Series II Wheel Tractor-Scraper Machine Systems Floor Roller - Assemble
G3304 and G3306 Engines Electric Starting Motor
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Lift Arms - Remove
994D Wheel Loader Braking System Brake Valve (Service Brake)
613C Series II Wheel Tractor-Scraper Machine Systems Floor Roller - Disassemble
966G Wheel Loader and 972G Wheel Loader Machine Systems Steering Cylinder - Install
994D Wheel Loader Power Train Priority Valve (Torque Converter)
854G Wheel Dozer Machine Systems Front Frame and Rear Frame - Separate
854G Wheel Dozer Machine Systems Front Frame and Rear Frame - Connect
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Disassemble
Field Installation of Decelerator Pedal{1276} Field Installation of Decelerator Pedal{1276}
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Assemble
D6G Track-Type Tractor Power Train Recoil Spring - Remove and Install
994D Wheel Loader Power Train Speed Sensor (Torque Converter Output)
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Assemble
D6G Track-Type Tractor Power Train Recoil Spring - Disassemble
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Electronic Control Module (ECM) - Replace
994D Wheel Loader Power Train Modulating Valve (Torque Converter Impeller Clutch)
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake - Remove