Parking Brake Actuator - Install
Installation Procedure
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Install parking brake actuator (6) to the transmission case. Align the yoke rod end with the parking brake lever. Install two nuts (7) to parking brake actuator (6) . Torque two nuts (7) to 120 ± 10 N·m (89 ± 7 lb ft) .
Show/hide table
Illustration 1 | g00396398 |
- Connect hose (5) to parking brake actuator (6) and tighten retaining nut (4) . Install clevis pin (2) and cotter pin (1) to yoke rod end (3) and the parking brake lever.
Show/hide table
Illustration 2 | g00396397 |
Caterpillar Information System:
613C Series II Wheel Tractor-Scraper Machine Systems Check Valve (Floor) - Remove
3306B Industrial Engine Electric Starting Motor
613C Series II Wheel Tractor-Scraper Machine Systems Floor Roller - Assemble
G3304 and G3306 Engines Electric Starting Motor
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Lift Arms - Remove
994D Wheel Loader Braking System Brake Valve (Service Brake)
613C Series II Wheel Tractor-Scraper Machine Systems Floor Roller - Disassemble
966G Wheel Loader and 972G Wheel Loader Machine Systems Steering Cylinder - Install
994D Wheel Loader Power Train Priority Valve (Torque Converter)
966G Wheel Loader and 972G Wheel Loader Machine Systems Steering Cylinder - Remove
3176C and 3196 Industrial Engines Vibration Damper and Pulley
966G Wheel Loader and 972G Wheel Loader Machine Systems Lift Arms - Install
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Disassemble
854G Wheel Dozer Machine Systems Front Frame and Rear Frame - Separate
854G Wheel Dozer Machine Systems Front Frame and Rear Frame - Connect
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Disassemble
Field Installation of Decelerator Pedal{1276} Field Installation of Decelerator Pedal{1276}
D6G Track-Type Tractor Power Train Hydraulic Track Adjusters - Assemble
D6G Track-Type Tractor Power Train Recoil Spring - Remove and Install
994D Wheel Loader Power Train Speed Sensor (Torque Converter Output)
613C Series II Wheel Tractor-Scraper Machine Systems Parking Brake Actuator - Assemble
D6G Track-Type Tractor Power Train Recoil Spring - Disassemble
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Electronic Control Module (ECM) - Replace