Crankshaft Front Seal - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
B (1)     | 1U-7430     | 前油封安装工具     | 1     |
C     | 5P-7295     | 套筒     | 1     |
Show/hide table
( 1 ) | 196-3165 发动机工具总成 的部分工具 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 利用工具 (B) 将曲轴前油封 (1) 安装到前壳体内。
Show/hide table
图 1 | g01664278 |
Show/hide table
图 2 | g01663973 |
注: 确保曲轴和前壳体的法兰清洁干燥。
- 如果配备,防尘圈 (2) 安装前,在防尘圈 (2) 的内径和减振器的外表面上涂抹薄薄的一层肥皂液。 利用工具 (C) 将防尘圈 (2) 安装到减振器上。 将防尘圈 (2) 安装到减振器上大约 13 mm (0.5 in) 的深度处。
注: 安装减振器会将防尘圈置于正确的位置。
End By: 安装减振器和皮带轮。 请参阅 拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Crankshaft Front Seal - Remove
G3500H 60Hz Generator Sets Water Pump - Inspect
C7 On-highway Engine Engine Oil Cooler - Install
C7 On-highway Engine Engine Oil Cooler - Remove
C7 On-highway Engine Fuel Filter Base - Remove and Install
C7 On-highway Engine Fuel Priming Pump - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Flywheel - Install
C9 Marine Engines and C9 Marine Generator Sets Flywheel - Remove
2003/10/01 New Fuel Lines Help to Eliminate Damage from Rubbing {1274}
3126B Industrial Engine Air Compressor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines E361 High Engine Coolant Temperature
C11 and C13 Engines for Caterpillar Built Machines E539 High Intake Manifold Air Temperature
EMCP3 General Information
2003/10/01 A New Cylinder Head Group For G3408 Engines {1100}
2003/12/01 Improved Auxiliary Drive Coupling {3279}
C9 Marine Engines and C9 Marine Generator Sets Water Pump - Disassemble
C9 Marine Engines and C9 Marine Generator Sets Water Pump - Assemble
3516B HD Generator Set Generator Set - Test
C9 Marine Engines and C9 Marine Generator Sets Engine Oil Filter Base - Remove
C9 Marine Engines and C9 Marine Generator Sets Engine Oil Filter Base - Install
C32 Petroleum Generator Sets Burn Prevention
3412C Generator Set Cooling System Coolant Sample (Level 2) - Obtain
C9 Marine Engines and C9 Marine Generator Sets Front Cover - Remove
C9 Marine Engines and C9 Marine Generator Sets Front Cover - Install