Removal Procedure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect tube assembly (1) and tube assembly (3) .
Illustration 1 | g01028569 |
- Remove bolts (2) .
- Remove fuel filter base (4) .
Installation Procedure
- Position fuel filter base (4) on the engine.
Illustration 2 | g01028569 |
- Install bolts (2) .
- Connect tube assembly (1) and tube assembly (3) .