Crankshaft Front Seal - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1U-7600 | 滑锤拉拔器 | 1 |
开始:
- 拆下减振器和皮带轮。 请参阅拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 如果配备，将防尘圈 (2) 从减振器上拆下。
Show/hide table
 | |
| 图 1 | g01663973 |
Show/hide table
 | |
| 图 2 | g01139023 |
- 使用工具 (A) 或者冲头和锤子在曲轴前油封 (1) 上冲出不少于三个的孔。
- 利用工具 (A) 将曲轴前密封 (1) 从前壳体上拆下。
Show/hide table
| 注意 |
|---|
确保使用主唇部拆卸曲轴前油封。 不要损坏曲轴前油封壳体的边缘。 |
Caterpillar Information System:
G3500H 60Hz Generator Sets Water Pump - Inspect
C7 On-highway Engine Engine Oil Cooler - Install
C7 On-highway Engine Engine Oil Cooler - Remove
C7 On-highway Engine Fuel Filter Base - Remove and Install
C7 On-highway Engine Fuel Priming Pump - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Flywheel - Install
C9 Marine Engines and C9 Marine Generator Sets Flywheel - Remove
2003/10/01 New Fuel Lines Help to Eliminate Damage from Rubbing {1274}
3126B Industrial Engine Air Compressor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines E361 High Engine Coolant Temperature
C11 and C13 Engines for Caterpillar Built Machines E539 High Intake Manifold Air Temperature
C11 and C13 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C7 PETROLEUM Petroleum Engine Crankshaft Front Seal - Install
EMCP3 General Information
2003/10/01 A New Cylinder Head Group For G3408 Engines {1100}
2003/12/01 Improved Auxiliary Drive Coupling {3279}
C9 Marine Engines and C9 Marine Generator Sets Water Pump - Disassemble
C9 Marine Engines and C9 Marine Generator Sets Water Pump - Assemble
3516B HD Generator Set Generator Set - Test
C9 Marine Engines and C9 Marine Generator Sets Engine Oil Filter Base - Remove
C9 Marine Engines and C9 Marine Generator Sets Engine Oil Filter Base - Install
C32 Petroleum Generator Sets Burn Prevention
3412C Generator Set Cooling System Coolant Sample (Level 2) - Obtain
C9 Marine Engines and C9 Marine Generator Sets Front Cover - Remove