Unit Injector Hydraulic Pump - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 192-5092 | Removal Tool | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect tube assembly (4), tube assembly (5), and tube assembly (6).
- Use Tooling (A) in order to disconnect hose assembly (3).
- Disconnect harness assembly (2) from unit injector hydraulic pump (1).
Show/hide table
Illustration 2 g01127845 - Remove bolts (7). Remove unit injector hydraulic pump (1).
Show/hide table
Illustration 1 | g01127843 |
Caterpillar Information System:
C7 Engines for Combat and Tactical Vehicles Customer Specified Parameters Worksheet
C7 Engines for Combat and Tactical Vehicles Customer Specified Parameters Table
C7 Marine Engines Crankshaft - Install
C7 Marine Engines Crankshaft - Remove
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
C7 and C9 On-Highway Engines Engine Speed/Timing Sensor - Calibrate
G3304 and G3306 Engines Crankshaft Front Seal and Wear Sleeve - Install
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C7 Engines for Combat and Tactical Vehicles System Overview
C7 On-highway Engine Connecting Rod Bearings - Install
3044C Industrial Engine Engine Oil and Filter - Change
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3304 and G3306 Engines Engine Support - Remove and Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Install
C7 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
3500B and 3500C Marine Propulsion Engines Air Shutoff System
3500B and 3500C Marine Propulsion Engines Analog Sensor Supply
3500B and 3500C Marine Propulsion Engines Cat Data Link
3500B and 3500C Marine Propulsion Engines CAN Data Link
3500B and 3500C Marine Propulsion Engines Digital Sensor Supply
3500B and 3500C Marine Propulsion Engines Electrical Power Supply
3500B and 3500C Marine Propulsion Engines Emergency Stop Switch