Installation Of A Four-Way Pilot Valve Group (Pattern Control Change) Caterpillar


Installation Of A Four-Way Pilot Valve Group (Pattern Control Change)

Usage:

EXCAVATORS320C (AMC, BCN, BDC, CCD, GHA),
320C L (ANB, BDE, BER, HBC),
320C S (BBL),
320C LN (BEA),
325C (BKW),
325C L (BLX, BMM, CRB),
325C LN (CSJ) EXCAVATORS

Problem:

The four-way pilot valve is a machine attachment in the Europe Africa Middle East (EAME) and Asia Pacific [excluding Caterpillar China Limited (CCL)] commercial groups. Instructions for the field installation of the four-way valve are not available.

Solution:

A Special Instruction for the field installation of the four-way pilot valve will be published for the EAME and Asia Pacific (excluding CCL) commercial groups. A Service Magazine article will be published to announce the availability of the Special Instruction.

COPYRIGHT 2002 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Use Electronic Techmician (ET) To Cancel Logged Diagnostic Codes Use Electronic Techmician (ET) To Cancel Logged Diagnostic Codes
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Incorrect Part Numbers In The M315 Parts Manual Incorrect Part Numbers In The M315 Parts Manual
New Procedure To Install Pilot Pump Bearing Gear New Procedure To Install Pilot Pump Bearing Gear
Recall And Replacement Of SR17, SR18, And SR21 Snowblowers Recall And Replacement Of SR17, SR18, And SR21 Snowblowers
New Seal Kit Improves Sealing Of Main Pump Shaft New Seal Kit Improves Sealing Of Main Pump Shaft
A Loose Element In The Water Separator May Cause A Sporadic Loss Of Machine Power A Loose Element In The Water Separator May Cause A Sporadic Loss Of Machine Power
Increase The Setting Of The Pressure Relief Valve For The Snowblower's Auger Increase The Setting Of The Pressure Relief Valve For The Snowblower's Auger
Confusion Generated Due To The Same Serial Number Prefixes Being Used At Different Facilities Confusion Generated Due To The Same Serial Number Prefixes Being Used At Different Facilities
Dozer Blade Hydraulic Operation Options Dozer Blade Hydraulic Operation Options
The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely
Parts Information For The New SR17, SR18, And SR21 Snowblowers Is Delayed Parts Information For The New SR17, SR18, And SR21 Snowblowers Is Delayed
Compatibility Between The Attachment Controller Software, Electronic Technician (ET), And Monitor Software To The Standard Controller Compatibility Between The Attachment Controller Software, Electronic Technician (ET), And Monitor Software To The Standard Controller
Reported Failures Of 110-4422 Rectifiers And 110-4424 Rectifiers On 3500-Series Generator Sets Reported Failures Of 110-4422 Rectifiers And 110-4424 Rectifiers On 3500-Series Generator Sets
Fuel Dilution Of The Oil In 3500B Engines Fuel Dilution Of The Oil In 3500B Engines
XT-6ES Hose Assemblies Have Increased Reliability And Durability In The Front Lines And The Pump Lines Groups XT-6ES Hose Assemblies Have Increased Reliability And Durability In The Front Lines And The Pump Lines Groups
Chute Deflector Drifts Down During Operation Of SR17, SR18, And SR21 Snowblowers Chute Deflector Drifts Down During Operation Of SR17, SR18, And SR21 Snowblowers
Excessive Vibration Experienced With SR18 And SR21 Snowblowers Excessive Vibration Experienced With SR18 And SR21 Snowblowers
Sidebar Retention Cotter Pin Failure Sidebar Retention Cotter Pin Failure
Improper Installation Of The 204-4024 Bracket Creates Unsafe Condition Improper Installation Of The 204-4024 Bracket Creates Unsafe Condition
Decal Of The Operating Pattern For The Hydraulic Controls Is Incorrect Decal Of The Operating Pattern For The Hydraulic Controls Is Incorrect
TITLE OF THE TIB TITLE OF THE TIB
Damage To The Bucket Cylinder Due To Excessive Pressure Damage To The Bucket Cylinder Due To Excessive Pressure
Machine Security System (MSS) Will Record Erroneous Events (Event 273) Machine Security System (MSS) Will Record Erroneous Events (Event 273)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.