Confusion Generated Due To The Same Serial Number Prefixes Being Used At Different Facilities Caterpillar


Confusion Generated Due To The Same Serial Number Prefixes Being Used At Different Facilities

Usage:

MINI HYDRAULIC EXCAVATOR303.5 (AFW, DCH),
304.5 (ANR, WAK) MINI HYDRAULIC EXCAVATOR

Problem:

Some confusion has been generated as a result of 303.5 and 304.5 Mini Hydraulic Excavators being manufactured/distributed from both Leicester and Sagami, where both facilities have utilized the same serial number prefixes: "AFW" for 303.5 machines and "ANR" for 304.5 machines. Although the machines are basically the same, there will be slight differences in the parts consists for each model due to locality.

Solution:

New serial number prefixes have been established for machines that are being manufactured and distributed from Leicester.

* All 303.5 machines manufactured/distribute from Leicester after June 1, 2001, have the serial number prefix "DCH".
* All 304.5 machines manufactured/distributed from Leicester after October 1, 2001, have the serial number prefix "WAK".

The previous prefixes of 303.5(AFW) and 304.5(ANR) continue to be used for machines that are manufactured/distributed from Sagami.

COPYRIGHT 2001 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Dozer Blade Hydraulic Operation Options Dozer Blade Hydraulic Operation Options
The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely
Parts Information For The New SR17, SR18, And SR21 Snowblowers Is Delayed Parts Information For The New SR17, SR18, And SR21 Snowblowers Is Delayed
V-Belt Failures And Engine Component Failures Due To Incorrect Belt Tension V-Belt Failures And Engine Component Failures Due To Incorrect Belt Tension
Modification Of The Switch Assembly For Sensing The Hydraulic Oil And Engine Oil Level Modification Of The Switch Assembly For Sensing The Hydraulic Oil And Engine Oil Level
The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely
FAILURE OF THE 169-5725 QUICK COUPLER GP ON 302.5 MINI HYDRAULIC EXCAVATORS FITTED WITH HAMMERS FAILURE OF THE 169-5725 QUICK COUPLER GP ON 302.5 MINI HYDRAULIC EXCAVATORS FITTED WITH HAMMERS
Failure Of The Drum Shaft Bearing In Cold Planers Due To Inadequate Lubrication Failure Of The Drum Shaft Bearing In Cold Planers Due To Inadequate Lubrication
Software Cross Reference Table For Certain 365B L Excavators Software Cross Reference Table For Certain 365B L Excavators
Low Level Leakage Experienced With The New Caterpillar Yellow Rod Seals Low Level Leakage Experienced With The New Caterpillar Yellow Rod Seals
Implement Hydraulic Cylinder Movement May Be Erratic On Certain 365B L Excavators Implement Hydraulic Cylinder Movement May Be Erratic On Certain 365B L Excavators
Incorrect Assembly Instructions For Rod Seals In Hydraulic Cylinders Incorrect Assembly Instructions For Rod Seals In Hydraulic Cylinders
Increase The Setting Of The Pressure Relief Valve For The Snowblower's Auger Increase The Setting Of The Pressure Relief Valve For The Snowblower's Auger
A Loose Element In The Water Separator May Cause A Sporadic Loss Of Machine Power A Loose Element In The Water Separator May Cause A Sporadic Loss Of Machine Power
New Seal Kit Improves Sealing Of Main Pump Shaft New Seal Kit Improves Sealing Of Main Pump Shaft
Recall And Replacement Of SR17, SR18, And SR21 Snowblowers Recall And Replacement Of SR17, SR18, And SR21 Snowblowers
New Procedure To Install Pilot Pump Bearing Gear New Procedure To Install Pilot Pump Bearing Gear
Incorrect Part Numbers In The M315 Parts Manual Incorrect Part Numbers In The M315 Parts Manual
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Use Electronic Techmician (ET) To Cancel Logged Diagnostic Codes Use Electronic Techmician (ET) To Cancel Logged Diagnostic Codes
Installation Of A Four-Way Pilot Valve Group (Pattern Control Change) Installation Of A Four-Way Pilot Valve Group (Pattern Control Change)
Compatibility Between The Attachment Controller Software, Electronic Technician (ET), And Monitor Software To The Standard Controller Compatibility Between The Attachment Controller Software, Electronic Technician (ET), And Monitor Software To The Standard Controller
Reported Failures Of 110-4422 Rectifiers And 110-4424 Rectifiers On 3500-Series Generator Sets Reported Failures Of 110-4422 Rectifiers And 110-4424 Rectifiers On 3500-Series Generator Sets
Fuel Dilution Of The Oil In 3500B Engines Fuel Dilution Of The Oil In 3500B Engines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.