Software Cross Reference Table For Certain 365B L Excavators Caterpillar

Software Cross Reference Table For Certain 365B L Excavators

Usage:

Software Cross Reference Table For Certain 365B L Excavators

CONFIDENTIAL

Show/hide table

TECHNICAL INFORMATION BULLETIN	AUGUST 22, 2001
EXCAVATORS	365B L (9PZ, 9TZ, AGD) EXCAVATORS
	Component Code(s) 7620, 1920

SUBJECT: SOFTWARE CROSS REFERENCE TABLE FOR CERTAIN 365B L
EXCAVATORS

PROBLEM:

New software files are continuously released in order to improve machine performance and the performance of machine attachments. The configuration of a machine and its attachments may require the use of multiple software files. The files must be compatible in order to use multiple files on a given machine. A cross reference of software files is currently not available in service publications.

SOLUTION:

Refer to the table for the identification of the latest software. The table is for standard machines and for machines that are configured with a one way or a combined hydraulic circuit including an auxiliary pump for medium pressure. The table also shows the compatibility between application software, electronic control modules, and service tool software for the 365B L Excavators listed. The cross reference table will be available in the Service Information System (SIS) with automatic updates.

NOTE: Use CAT Electronic Technician (ET) Service Tool Version 3.0 and up.

August 22, 2001
Component Code(s) 7620, 1920

Show/hide table

Machine Software Cross Reference Table
System	Control Group Hardware Only	Application Software Only	Optional Service Replacements Hardware + Software
ABL-2C+ (Machine Control)	151-2106	195-8876	191-6889
ABL-1M (VIDS MAIN) Autolube Overload Warning Device Autolube + Overload Warning Device	169-0489	195-8878 195-8880 195-8882 195-8884	191-6881 191-6883 191-6885 191-6887
MESSAGE CENTER (VIDS graphic display)	148-2949	180-3038	177-7710
ADEM (3196 engine)	145-7806	174-9138	N/A

COPYRIGHT 2001 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Low Level Leakage Experienced With The New Caterpillar Yellow Rod Seals Low Level Leakage Experienced With The New Caterpillar Yellow Rod Seals

Implement Hydraulic Cylinder Movement May Be Erratic On Certain 365B L Excavators Implement Hydraulic Cylinder Movement May Be Erratic On Certain 365B L Excavators

Incorrect Assembly Instructions For Rod Seals In Hydraulic Cylinders Incorrect Assembly Instructions For Rod Seals In Hydraulic Cylinders

A Defective Rotary Dial Switch In The Monitor For The Solid State Magnet Controller May Prevent A Clean Material Drop For Certain Material Handlers A Defective Rotary Dial Switch In The Monitor For The Solid State Magnet Controller May Prevent A Clean Material Drop For Certain Material Handlers

Incorrect Installation of the Seals in Final Drives May Damage the Seals Incorrect Installation of the Seals in Final Drives May Damage the Seals

A Boom Hunting Condition May Occur During Modulation of the Boom Up Function A Boom Hunting Condition May Occur During Modulation of the Boom Up Function

Paralleling Generators To Utility Substations Paralleling Generators To Utility Substations

Reconnecting The 166-0294 Harness To The Diverter Valve For The BA18 Angle Broom Reconnecting The 166-0294 Harness To The Diverter Valve For The BA18 Angle Broom

INSTALLATION OF A RELIEF VALVE TO PREVENT BUCKET CYLINDER DAMAGE INSTALLATION OF A RELIEF VALVE TO PREVENT BUCKET CYLINDER DAMAGE

The Circuit Breaker For The Heating And Air Conditioning Fan The Circuit Breaker For The Heating And Air Conditioning Fan

Adjusting The Parameters Of The Autoshift Transmission Adjusting The Parameters Of The Autoshift Transmission

Hydraulic Pressure Does Not Build Up In The Main Hydraulic Pump Hydraulic Pressure Does Not Build Up In The Main Hydraulic Pump

Failure Of The Drum Shaft Bearing In Cold Planers Due To Inadequate Lubrication Failure Of The Drum Shaft Bearing In Cold Planers Due To Inadequate Lubrication

FAILURE OF THE 169-5725 QUICK COUPLER GP ON 302.5 MINI HYDRAULIC EXCAVATORS FITTED WITH HAMMERS FAILURE OF THE 169-5725 QUICK COUPLER GP ON 302.5 MINI HYDRAULIC EXCAVATORS FITTED WITH HAMMERS

The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely

Modification Of The Switch Assembly For Sensing The Hydraulic Oil And Engine Oil Level Modification Of The Switch Assembly For Sensing The Hydraulic Oil And Engine Oil Level

V-Belt Failures And Engine Component Failures Due To Incorrect Belt Tension V-Belt Failures And Engine Component Failures Due To Incorrect Belt Tension

Parts Information For The New SR17, SR18, And SR21 Snowblowers Is Delayed Parts Information For The New SR17, SR18, And SR21 Snowblowers Is Delayed

The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely The Actuator Rod In The Main Hydraulic Pump May Wear Prematurely

Dozer Blade Hydraulic Operation Options Dozer Blade Hydraulic Operation Options

Confusion Generated Due To The Same Serial Number Prefixes Being Used At Different Facilities Confusion Generated Due To The Same Serial Number Prefixes Being Used At Different Facilities

Increase The Setting Of The Pressure Relief Valve For The Snowblower's Auger Increase The Setting Of The Pressure Relief Valve For The Snowblower's Auger

A Loose Element In The Water Separator May Cause A Sporadic Loss Of Machine Power A Loose Element In The Water Separator May Cause A Sporadic Loss Of Machine Power

New Seal Kit Improves Sealing Of Main Pump Shaft New Seal Kit Improves Sealing Of Main Pump Shaft