Turbocharger Cartridge Groups Available For Parts Service{1053,1052}
Usage:
3606 (8RB),
3608 (6MC),
3612 (9RC),
3616 (1PD, 1FN) Engines
Turbocharger cartridge groups are now available for parts service for the turbocharger groups in these engines. The cartridge groups identified in the chart include an improved design for the connection of the turbine blade to the turbine wheel. The new design utilizes 4 convolutions in place of the former 3 convolutions. This results in improved reliabiliy.
The chart identifies the major serviceable components of the turbocharger groups used on these engines.
Caterpillar Information System:
1995/08/01 New Turbocharger Bearing Clearance Specifications{1052,1053}
1995/08/01 New Air Cleaner And Silencer Has Increased Noise Attenuation{1051,1054}
1995/08/01 New Rain Shields And Automatic Draining Precleaner Cup Assembly Available{1051}
1995/08/01 New Piston Crown Assembly Used In Piston And Rod Group{1214}
1995/08/01 Check For Correct Location Of Trolling Mode Input Wire{1408}
1995/08/01 New Oil Seal And Seal Collar Used In Auxiliary Sea Water Pump Groups{1371}
1995/08/01 Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/01 Valve Lash Adjustment Intervals{1105}
1995/08/01 Improved Cylinder Head Group Components And Valve Mechanism Group Components Provide Increased Service Life{1100,1102,1103,1104,1105}
1995/08/01 New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/08/01 Piston Usage Chart For Two Piece Pistons{1214}
1995/08/01 Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01 New Adapters Used In Aftercooler Groups{1063}
1995/08/01 Improved Aftercooler Tube Assemblies Now Stainless Steel To Increase Corrosion Resistance{1063}
1995/08/01 Change In Crankshaft Seal Wear Sleeve Installation Procedure{1160,1161}
1995/08/01 New Air Shut-Off Groups Used{1078}
1995/08/01 New Crankshaft Main Bearing Installation Procedure{1203}
1995/08/01 Changes To Heavy Fuel Flow Rate Requirements{1250}
1995/08/01 Torque Value Increased On Connector In Order To Prevent Loosening{1252}
1995/08/01 New Rubber Lined Clamp Assembly Used In Fuel Injection Lines Groups{1252}
1995/08/01 Liquid Level Gauge Available As Service Repair{1350,1354}
1995/08/01 New Water Temperature Regulator Used{1355}
1995/08/01 New High Temperature Resistant Seal Group And Seal Used In Water Pump Groups{1361}
1995/08/01 New Tube Assembly Used In Water Lines Groups{1380}