1995/08/01 Caterpillar


New Adapters Used In Aftercooler Groups{1063}

Usage:


3600 Family Of Engines

Description of Change: New adapters are used in the aftercooler groups on these engines. The new adapters are made of stainless steel to provide increased corrosion resistance and easier removal.

Adaptable To: The new 123-6256 and 123-6257 Adapters replace the 1W6916 Adapter in the 1W-0851, 1W-0888 and 1W-0921 Aftercooler Groups.

The 1W-0851 Aftercooler Group uses only the new 123-6256 Adapter. Two new adapters are required for each group. See Illustration 1. This aftercooler group is used on 3606, G3606, 3608, and G3608 Engines.

The 1W-0888 and 1W-0921 Aftercooler Groups use both the new 123-6256 and 123-6257 Adapters. Two of each of the new adapters are required for each group. See Illustration 2. The 1W-0888 Aftercooler Group is used on 3612 and G3612 Engines. The 1W-0921 Aftercooler Group is used on 3616 and G3616 Engines.


Illustration 1. Location of new 123-6256 Adapters (1) in the 1W-0851 Aftercooler Group.


Illustration 2. Location of new 123-6256 Adapters (1) and 123-6257 Adapters (2) in the 1W-0888 and 1W-0921 Aftercooler Groups.

Caterpillar Information System:

1995/08/01 Turbocharger Cartridge Groups Available For Parts Service{1053,1052}
1995/08/01 New Turbocharger Bearing Clearance Specifications{1052,1053}
1995/08/01 New Air Cleaner And Silencer Has Increased Noise Attenuation{1051,1054}
1995/08/01 New Rain Shields And Automatic Draining Precleaner Cup Assembly Available{1051}
1995/08/01 New Piston Crown Assembly Used In Piston And Rod Group{1214}
1995/08/01 Check For Correct Location Of Trolling Mode Input Wire{1408}
1995/08/01 New Oil Seal And Seal Collar Used In Auxiliary Sea Water Pump Groups{1371}
1995/08/01 Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/01 Valve Lash Adjustment Intervals{1105}
1995/08/01 Improved Cylinder Head Group Components And Valve Mechanism Group Components Provide Increased Service Life{1100,1102,1103,1104,1105}
1995/08/01 New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/08/01 Piston Usage Chart For Two Piece Pistons{1214}
1995/08/01 Improved Aftercooler Tube Assemblies Now Stainless Steel To Increase Corrosion Resistance{1063}
1995/08/01 Change In Crankshaft Seal Wear Sleeve Installation Procedure{1160,1161}
1995/08/01 New Air Shut-Off Groups Used{1078}
1995/08/01 New Crankshaft Main Bearing Installation Procedure{1203}
1995/08/01 Changes To Heavy Fuel Flow Rate Requirements{1250}
1995/08/01 Torque Value Increased On Connector In Order To Prevent Loosening{1252}
1995/08/01 New Rubber Lined Clamp Assembly Used In Fuel Injection Lines Groups{1252}
1995/08/01 Liquid Level Gauge Available As Service Repair{1350,1354}
1995/08/01 New Water Temperature Regulator Used{1355}
1995/08/01 New High Temperature Resistant Seal Group And Seal Used In Water Pump Groups{1361}
1995/08/01 New Tube Assembly Used In Water Lines Groups{1380}
1995/08/01 Gasket To Be Replaced After Spark Plug Inspection{1555}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.