Installation Procedure to Retrofit a 471-1988 Swivel Guard Upgrade Kit on Certain Excavators {7183}
- Excavator
- 330D, 336D, 336D2, 336E and 336F Excavators
- 328D (S/N: SWF1-UP; BYH1-UP; GTN1-UP; MKR1-UP; RMX1-UP)
- 335F (S/N: KNE1-UP)
- 336 GC (S/N: GSF1-UP; EBJ1-UP; HFJ1-UP; JFW1-UP)
- 328D (S/N: SWF1-UP; BYH1-UP; GTN1-UP; MKR1-UP; RMX1-UP)
Introduction
This Special Instruction outlines the installation procedure to retrofit a 471-1988 Swivel Guard Upgrade Kit on certain excavators listed above.
Do not perform any of the procedures or order any parts until you have read and understand the instructions contained in this publication.
Parts List
Show/hide table
471-1988 Swivel Guard Upgrade Kit | |||
---|---|---|---|
Item | Qty | Part Number | Part Name |
1 | 1 | Plate As | |
2 | 1 | Plate As | |
3 | 6 | Hard Washer | |
4 | 6 | Locking Bolt |
Machine Preparation
Show/hide table
Illustration 1 | g02280104 |
Servicing position of an Excavator |
- Place the machine in the servicing position. Refer to the appropriate Operation and Maintenance Manual for the proper procedure.
Installation Procedure
Show/hide table
Illustration 2 | g03760081 |
(1) (2) (3) (4) (A) Lower frame |
- Install plate assembly (1) into lower frame (A).
- Install plate assembly (2) into lower frame (A).
- Install six hard washers (4) and six locking bolts (3) in order to secure plate assemblies (1) and (2).
Caterpillar Information System:
Installation Procedure to Retrofit Boom and Stick Lowering Control Valves, and a Stick Cylinder Lines Group on Certain 320D, 320D2, and 323DExcavators{5117, 5453, 5458} Installation Procedure to Retrofit Boom and Stick Lowering Control Valves, and a Stick Cylinder Lines Group on Certain 320D, 320D2, and 323DExcavators{5117, 5453, 5458}
Installation Procedure to Retrofit a Boom Lowering Control Valve and a Stick Lowering Control Valve on Certain 330D, 336D, and 336D2 Excavators {5067, 5117, 5147, 5453, 5811} Installation Procedure to Retrofit a Boom Lowering Control Valve and a Stick Lowering Control Valve on Certain 330D, 336D, and 336D2 Excavators {5067, 5117, 5147, 5453, 5811}
Installation Procedure to Retrofit a 471-1992 Heavy Duty Swivel Guard Upgrade Kit on Certain Excavators {7153} Installation Procedure to Retrofit a 471-1992 Heavy Duty Swivel Guard Upgrade Kit on Certain Excavators {7153}
C4.4 Engines General Information
2014/10/27 A New Improved Bucket is Used on Certain 311D Hydraulic Excavators {6526}
Installation of the 260-7860 Pilot Lines Gp On Certain Hydraulic Excavators{5057, 5059} Installation of the 260-7860 Pilot Lines Gp On Certain Hydraulic Excavators{5057, 5059}
Engine Oil Pressure Switch May Cause Oil Pressure Warnings on Certain E Series Mini Hydraulic Excavators{1408} Engine Oil Pressure Switch May Cause Oil Pressure Warnings on Certain E Series Mini Hydraulic Excavators{1408}
Installation Procedure for the 194-0562 Lines Support Gp {5057, 5057} Installation Procedure for the 194-0562 Lines Support Gp {5057, 5057}
Installation Procedure to Retrofit Overhead Guard and Front Window Guard Upgrade Kits on the Cab of Certain Large Excavators and Mobile Hydraulic Power Units {7159} Installation Procedure to Retrofit Overhead Guard and Front Window Guard Upgrade Kits on the Cab of Certain Large Excavators and Mobile Hydraulic Power Units {7159}
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Sensor (Multi-Signal, Analog, Active) - Test
Installation Procedure to Retrofit Overhead Guard and Front Window Guard Upgrade Kits on the Cab of Certain D Series Excavators {7159} Installation Procedure to Retrofit Overhead Guard and Front Window Guard Upgrade Kits on the Cab of Certain D Series Excavators {7159}
Installation Instruction for 484-7816 Falling Object Guard Kit {7153, 7159} Installation Instruction for 484-7816 Falling Object Guard Kit {7153, 7159}
Installation Procedure to Retrofit a 471-1985 Swivel Guard Upgrade Kit on Certain Excavators {7153} Installation Procedure to Retrofit a 471-1985 Swivel Guard Upgrade Kit on Certain Excavators {7153}
323F Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
2014/11/14 New EMCP 3.2/3.3 Software Is Now Available For Use On Certain Cat® Products {4490, 7620}
793F Off-Highway Truck Fuel Correction Factor - Set
Installation of the 467-8461 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 467-8461 Front Lines Gp on Certain Hydraulic Excavators {5057}
Installation Procedure for the 467-4033 Hydraulic Kit on Certain Hydraulic Excavators{5057, 5264, 5479} Installation Procedure for the 467-4033 Hydraulic Kit on Certain Hydraulic Excavators{5057, 5264, 5479}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Engine Starting
349F and 352F Excavators Engine Supplement Diesel Exhaust Fluid Filter - Remove and Install
Commissioning Procedure for the 794 AC, 796 AC, and 798 AC Off-Highway Trucks {1000, 7000, 7961} Commissioning Procedure for the 794 AC, 796 AC, and 798 AC Off-Highway Trucks {1000, 7000, 7961}
2014/10/27 The Standard Cat HYDO Oil Change Interval is Extended on All D2-Series, E-Series, and F-Series Excavators {5095, 7000}
335F CR Excavator C7.1 Engine Supplement Water Temperature Regulator - Remove and Install
2014/12/16 Replacing Stem and Spring in Pressure Control Valves H110 and H115 {5117}