Engine Starting
Megjegyzés A motor csak akkor indul be, ha az irányvezérlő kar ÜRES helyzetben van.
Megjegyzés Hideg időben történő alkalmazáskor várjon addig, amíg az indítássegítő berendezés jelzőlámpája ki nem kapcsol. Amikor a motor indítókapcsolójának kulcsa BE helyzetben van, ez azt jelzi, hogy az izzítógyertyák működésben vannak. Miután az indítássegítő jelzőlámpa lekapcsolt, beindíthatja a motort.
Show/hide table
| FIGYELMEZTETÉS |
|---|
|
Ne használja az indítómotort 30 másodpercnél hosszabb ideig. Újbóli indítózás előtt engedje az indítót 2 percig hűlni. Ha a motort nem alacsony fordulatszámon járatja mindaddig, amíg a motorolaj kijelző lámpája/mérőműszere azt nem jelzi, hogy a motorolaj nyomása már elérte a megfelelő szintet, a turbófeltöltő (ha a felszereltség része) megrongálódhat. |
Caterpillar Information System:
Installation Procedure for the 467-4033 Hydraulic Kit on Certain Hydraulic Excavators{5057, 5264, 5479} Installation Procedure for the 467-4033 Hydraulic Kit on Certain Hydraulic Excavators{5057, 5264, 5479}
Installation of the 467-8461 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 467-8461 Front Lines Gp on Certain Hydraulic Excavators {5057}
793F Off-Highway Truck Fuel Correction Factor - Set
2014/11/14 New EMCP 3.2/3.3 Software Is Now Available For Use On Certain Cat® Products {4490, 7620}
323F Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
Installation Procedure to Retrofit a 471-1985 Swivel Guard Upgrade Kit on Certain Excavators {7153} Installation Procedure to Retrofit a 471-1985 Swivel Guard Upgrade Kit on Certain Excavators {7153}
Installation Procedure to Retrofit a 471-1988 Swivel Guard Upgrade Kit on Certain Excavators {7183} Installation Procedure to Retrofit a 471-1988 Swivel Guard Upgrade Kit on Certain Excavators {7183}
Installation Procedure to Retrofit Boom and Stick Lowering Control Valves, and a Stick Cylinder Lines Group on Certain 320D, 320D2, and 323DExcavators{5117, 5453, 5458} Installation Procedure to Retrofit Boom and Stick Lowering Control Valves, and a Stick Cylinder Lines Group on Certain 320D, 320D2, and 323DExcavators{5117, 5453, 5458}
Installation Procedure to Retrofit a Boom Lowering Control Valve and a Stick Lowering Control Valve on Certain 330D, 336D, and 336D2 Excavators {5067, 5117, 5147, 5453, 5811} Installation Procedure to Retrofit a Boom Lowering Control Valve and a Stick Lowering Control Valve on Certain 330D, 336D, and 336D2 Excavators {5067, 5117, 5147, 5453, 5811}
Installation Procedure to Retrofit a 471-1992 Heavy Duty Swivel Guard Upgrade Kit on Certain Excavators {7153} Installation Procedure to Retrofit a 471-1992 Heavy Duty Swivel Guard Upgrade Kit on Certain Excavators {7153}
C4.4 Engines General Information
2014/10/27 A New Improved Bucket is Used on Certain 311D Hydraulic Excavators {6526}
349F and 352F Excavators Engine Supplement Diesel Exhaust Fluid Filter - Remove and Install
Commissioning Procedure for the 794 AC, 796 AC, and 798 AC Off-Highway Trucks {1000, 7000, 7961} Commissioning Procedure for the 794 AC, 796 AC, and 798 AC Off-Highway Trucks {1000, 7000, 7961}
2014/10/27 The Standard Cat HYDO Oil Change Interval is Extended on All D2-Series, E-Series, and F-Series Excavators {5095, 7000}
335F CR Excavator C7.1 Engine Supplement Water Temperature Regulator - Remove and Install
2014/12/16 Replacing Stem and Spring in Pressure Control Valves H110 and H115 {5117}
325F L Excavator Additional Messages
325F L Excavator Sound Information and Vibration Information
325F L Excavator Capacities (Refill)
335F CR Excavator C7.1 Engine Supplement Belt Tensioner - Remove and Install
Installation Procedure for the Fender Cover on Certain Excavators{7252} Installation Procedure for the Fender Cover on Certain Excavators{7252}
335F CR Excavator C7.1 Engine Supplement Aftercooler - Remove and Install
325F L Excavator Specifications