- Excavator:
- 311D (S/N: CLA1-UP; DWR1-UP)
- Work Tool:
- BUCKET (S/N: X1B1-UP)
Description of Change: The new bucket has better cutting edge retention than the former bucket.
Adaptable To:
Item     | New Part Number     | Description     | Item     | Former Part Number     |
---|---|---|---|---|
1     | 439-7298     | Bucket     | 3     | 327-3649     |
The former buckets can be modified in order to improve the retention properties of the cutting edge.
Two options are available for modifying the former 327-3649 Ditch Cleaning Bucket Assembly .
- Replace former base edge (2) with new production edge (4) .
Illustration 1 | g03739499 |
(1) Former bucket - 327-3649 Ditch Cleaning Bucket Assembly (2) Former base - 167-0261 Edge (3) New bucket - 439-7298 General Purpose Bucket Arrangement (4) New base - 436-5478 Edge |
- Remove former cutting edge (5). Drill former base edge (2) to accept the new production bolt on cutting edge (6) .
- Drill eight holes (7) in former base (2) at the locations shown in Illustration 3.
Show/hide tableIllustration 3 g03739934
(A) 659 mm (25.94483 inch)
(B) 475.7 mm (18.728 inch)
(C) 292.4 mm (11.512 inch)
(D) 109.1 mm (4.295 inch)
(E) 99.4 mm (3.913 inch)
(2) Former base - 167-0261 Edge
(7) Hole - 27.5 mm (1.083 inch)
Illustration 2 | g03739537 |
(1) Former bucket - 327-3649 Ditch Cleaning Bucket Assembly (3) New bucket - 439-7298 General Purpose Bucket Arrangement (5) Former - 167-0316 Cutting Edge Gp (6) New - 436-5489 Cutting Edge Gp |