311C-330C, 345B Series II, 365B and 385B Excavators Caterpillar

Fuel Tank Water and Sediment - Drain

Usage:

322C ADX

Katup pembuangan tangki bahan bakar terletak di bagian bawah pompa hidrolik utama.

Show/hide table




Ilustrasi 1	g01043694

Catatan: Gunakan petunjuk pada Buku Petunjuk Pengoperasian dan Perawatan, "Informasi Umum Mengenai Keadaan Bahaya" untuk mengetahui informasi mengenai penampungan tumpahan cairan.

Buka katup pembuangan dengan cara memutar katup berlawanan arah jarum jam. Biarkan air dan endapannya mengalir ke dalam sebuah tempat penampungan.
Catatan: Buang semua cairan bekas sesuai dengan peraturan perundangan yang berlaku.

Tutup katup pembuangan dengan cara memutar katup searah jarum jam.

Mengisi Tangki Bahan Bakar

Bahan bakar sekarang dapat ditambahkan ke dalam tangki, apabila diperlukan. Lepaskan tutup tangki bahan bakar dan isi bahan bakar melalui lubang pengisian.

Pastikan bahwa tutup tangki bahan bakar terkunci rapat setelah selesai melakukan pengisian.

Beberapa mesin tertentu dilengkapi dengan pompa pengisian bahan bakar elektrik. Untuk mendapatkan informasi lebih terperinci, lihat Buku Petunjuk Pengoperasian dan Perawatan, "Pompa Transfer Bahan Bakar (Pengisian Ulang)".

Caterpillar Information System:

C15 and C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install

A19B and A26B Augers Mounting Bracket - Remove and Install

325C Forest Machines Machine Systems Swing Drive - Remove

Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553} Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553}

311C-330C, 345B Series II, 365B and 385B Excavators Fuel Tank Shutoff and Drain Control

C15 and C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install

2004/03/29 Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}

307C Excavator Lifting Capacities

A19B and A26B Augers Auger Planetary - Assemble

C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Install

A19B and A26B Augers Auger Planetary - Disassemble

3524B Engines for 797 and 797B Off-Highway Trucks Cold Mode Operation

2004/02/16 Track Roller Groups (Heavy Duty) are Available {4180}

2003/12/29 A New Torque Specification Is Now Used For The Fitting Assembly In The Pilot Lines Group {5057, 5059}

C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove - If Equipped

C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped

M325D and M330D Excavators Power Train Electronic Control System General Information

325C Material Handler Maintenance Interval Schedule

311C-330C, 345B Series II, 365B and 385B Excavators Stopping the Engine

M325C Excavator Machine System Fuel Tank

325C Forest Machines Machine Systems Swing Drive - Disassemble

C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove

C15 and C18 Engines for Caterpillar Built Machines Flywheel - Install

2003/12/29 A New Seal Improves Durability {3282, 3282, 7555}