2004/03/29 Caterpillar


Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}

Usage:

D3400 01T
Articulated Truck:
  • All
    Asphalt Paver:
  • All
    Challenger:
  • All
    Cold Planer:
  • All
    Combine:
  • All
    Commercial Engines and Truck Engines:
  • All
    Earthmoving Compactor:
  • All
    Excavator:
  • All
  • All 300B Family Excavators
  • All 300C Family Excavators
    Forest Products:
  • All
    Motor Grader:
  • All
    Off-Highway Truck/Tractor:
  • All
    Pipelayer:
  • All
    Road Reclaimer/Soil Stabilizer:
  • All
    Soil Compactor:
  • All
    Track-Type Loader:
  • All
    Track-Type Skidder:
  • All
    Track-Type Tractor:
  • All
    Wheel Dozer:
  • All
    Wheel Loader:
  • All
  • An fuel priming pump is available for your Caterpillar equipment with a 24 volt system.

    The fuel priming pump reduces the time that is needed in order to prime the fuel system. The fuel priming pump will help eliminate contamination of the fuel supply.

    This Special Instruction has been revised in order to add the following products:

    • Off-Highway Truck/Tractor

    • Wheel Dozer

    • Wheel Loader

    This Special Instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).

    Caterpillar Information System:

    307C Excavator Lifting Capacities
    A19B and A26B Augers Auger Planetary - Assemble
    C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Install
    A19B and A26B Augers Auger Planetary - Disassemble
    3524B Engines for 797 and 797B Off-Highway Trucks Cold Mode Operation
    A19B and A26B Augers Gerotor Motor - Install
    A19B and A26B Augers Gerotor Motor - Remove
    A19B and A26B Augers Auger Planetary and Gerotor Motor - Install
    A19B and A26B Augers Auger Planetary and Gerotor Motor - Remove
    C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
    301.5, 301.6 and 301.8 Mini Hydraulic Excavators Window (Front) - Later Type (If Equipped)
    302.5 Mini Hydraulic Excavator Engine Starting
    C15 and C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install
    311C-330C, 345B Series II, 365B and 385B Excavators Fuel Tank Shutoff and Drain Control
    Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553} Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553}
    325C Forest Machines Machine Systems Swing Drive - Remove
    A19B and A26B Augers Mounting Bracket - Remove and Install
    C15 and C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install
    311C-330C, 345B Series II, 365B and 385B Excavators Fuel Tank Water and Sediment - Drain
    2004/02/16 Track Roller Groups (Heavy Duty) are Available {4180}
    2003/12/29 A New Torque Specification Is Now Used For The Fitting Assembly In The Pilot Lines Group {5057, 5059}
    C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove - If Equipped
    C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped
    M325D and M330D Excavators Power Train Electronic Control System General Information
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.