Auger Planetary and Gerotor Motor - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
- Install Tooling (A) .
Show/hide table
 | |
| Illustration 1 | g01043551 |
Show/hide table
 | |
| Illustration 2 | g01043552 |
- Attach a suitable lifting device to Tooling (A) .
- Install the auger planetary and gerotor motor (5) to auger drive housing (1) .
- Install fitting (3) .
- Install bolts (4) .
- Tighten fitting (3) .
Show/hide table
 | |
| Illustration 3 | g01043550 |
- Connect hose assemblies (2) .
End By: Install the auger bit. Refer to Disassembly and Assembly, "Auger Bit - Remove and Install".
Caterpillar Information System:
A19B and A26B Augers Auger Planetary and Gerotor Motor - Remove
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Window (Front) - Later Type (If Equipped)
302.5 Mini Hydraulic Excavator Engine Starting
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Assemble
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Disassemble
5110B Excavator Maintenance Interval Schedule
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
345B Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Equipped with Boom and Stick Lowering Control Valves
M325C Material Handler Fire Extinguisher Location
307C Excavator Supplement Sound Information and Vibration Information
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Install
A19B and A26B Augers Gerotor Motor - Remove
A19B and A26B Augers Gerotor Motor - Install
3524B Engines for 797 and 797B Off-Highway Trucks Cold Mode Operation
A19B and A26B Augers Auger Planetary - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Install
A19B and A26B Augers Auger Planetary - Assemble
307C Excavator Lifting Capacities
2004/03/29 Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
C15 and C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install
311C-330C, 345B Series II, 365B and 385B Excavators Fuel Tank Shutoff and Drain Control
Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553} Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553}
325C Forest Machines Machine Systems Swing Drive - Remove