Rear Power Take-Off (RPTO) - Remove - If Equipped
Show/hide table
需要的工具 | |||
---|---|---|---|
工具 | 零件号 | 零件名称 | 数量 |
A | 1P-0520 | 冲头总成 | 1 |
开始:
- 卸下飞轮。 请参阅拆解和组装, "飞轮 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆卸螺栓 (1)。 从飞轮壳体上卸下接头 (2) 和 O 形密封圈。
- 拆卸螺栓 (3)。 卸下护圈组件 (4)。 卸下惰齿轮 (5)。
Show/hide table
图 2 g01134262 - 从飞轮壳体上卸下齿轮组件 (6) 和齿轮组件 (7)。
Show/hide table
图 3 g01134263 - 使用工具 (A),从接头 (2) 上卸下套筒轴承 (8)。
Show/hide table
图 4 g01134250 - 从飞轮壳体的后侧卸下螺栓和盖 (9)。 使用工具 (A),从飞轮壳体上卸下套筒轴承 (11)。
- 从飞轮壳体的后侧卸下螺栓和盖 (10)。 使用工具 (A),从飞轮壳体上卸下套筒轴承 (12)。
Show/hide table
图 1 | g01115921 |
Caterpillar Information System:
2003/12/29 A New Torque Specification Is Now Used For The Fitting Assembly In The Pilot Lines Group {5057, 5059}
2004/02/16 Track Roller Groups (Heavy Duty) are Available {4180}
311C-330C, 345B Series II, 365B and 385B Excavators Fuel Tank Water and Sediment - Drain
C15 and C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install
A19B and A26B Augers Mounting Bracket - Remove and Install
325C Forest Machines Machine Systems Swing Drive - Remove
Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553} Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553}
311C-330C, 345B Series II, 365B and 385B Excavators Fuel Tank Shutoff and Drain Control
C15 and C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install
2004/03/29 Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
307C Excavator Lifting Capacities
A19B and A26B Augers Auger Planetary - Assemble
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped
M325D and M330D Excavators Power Train Electronic Control System General Information
325C Material Handler Maintenance Interval Schedule
311C-330C, 345B Series II, 365B and 385B Excavators Stopping the Engine
M325C Excavator Machine System Fuel Tank
325C Forest Machines Machine Systems Swing Drive - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Install
2003/12/29 A New Seal Improves Durability {3282, 3282, 7555}
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - Equipped with Rear Power Take-Off
325C Forest Machines Machine Systems Swing Drive - Assemble