Flywheel - Remove
Show/hide table
| 需要的工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | - | 导向螺柱 (5/8 - 18 UNF X 8 1/2 in) |
1 |
- 卸下一个螺栓 (1)。 将工具 (A) 安装到飞轮上。 使用适当的起吊设备托住飞轮。 飞轮 (2) 的重量约为
68 kg (150 lb) 。 - 卸下将飞轮固定在曲轴上的其余螺栓 ( 1)。 拆卸飞轮 (2)。
- 拆卸工具 (A)。
- 如有必要，使用锤子和冲头，从飞轮 ( 2) 上卸下齿圈 (3)。
Show/hide table
| |
| 图 1 | g01115663 |
Caterpillar Information System:
325C Forest Machines Machine Systems Swing Drive - Disassemble
M325C Excavator Machine System Fuel Tank
311C-330C, 345B Series II, 365B and 385B Excavators Stopping the Engine
325C Material Handler Maintenance Interval Schedule
M325D and M330D Excavators Power Train Electronic Control System General Information
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove - If Equipped
2003/12/29 A New Torque Specification Is Now Used For The Fitting Assembly In The Pilot Lines Group {5057, 5059}
2004/02/16 Track Roller Groups (Heavy Duty) are Available {4180}
311C-330C, 345B Series II, 365B and 385B Excavators Fuel Tank Water and Sediment - Drain
C15 and C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install
A19B and A26B Augers Mounting Bracket - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Install
2003/12/29 A New Seal Improves Durability {3282, 3282, 7555}
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - Equipped with Rear Power Take-Off
325C Forest Machines Machine Systems Swing Drive - Assemble
2003/12/29 A New Welding Process Improves The Tube Assembly In The Pump Lines {5057}
302.5 Mini Hydraulic Excavator Window Wiper and Washer Control
302.5 Mini Hydraulic Excavator Cab Door - If Equipped
307C Excavator Lifting Capacities
2006/03/20 New Design of the Injector Provides Improved Durability {1290, 1714}
325C Forest Machines Machine Systems Swing Drive - Install
C15 and C18 Engines for Caterpillar Built Machines Engine Support (Front) - Remove and Install