Steering Clutch and Brake - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 3     |
Start By:
- Separate the final drive from the steering clutch and from the brake. Refer to Disassembly and Assembly, "Final Drive, Steering Clutch, and Brake - Separate" for the correct procedure.
- Remove bolts (1) and plate (2) .
Show/hide table
Illustration 1 | g00620422 |
- Remove sleeve bearings (3) from plate (2) .
Show/hide table
Illustration 2 | g00620495 |
- Remove input hub (4) .
Show/hide table
Illustration 3 | g00620496 |
- Remove clutch plates (5) and friction discs (6) from hub (7) .
Show/hide table
Illustration 4 | g00620498 |
- Remove piston (8) from hub (7) .
Show/hide table
Illustration 5 | g00620499 |
Show/hide table
Illustration 6 | g00620501 |
- Remove sleeve bearing (9) .
- Remove seals (10) and (11) from piston (8) .
- Turn over the brake assembly.
Show/hide table
Illustration 7 | g00620502 |
- Remove ring (12) from hub (7) .
- Fasten a hoist and Tool (A) to housing (13). Remove the brake assembly from hub (7). The weight of the brake assembly is 86 kg (189.6 lb).
Show/hide table
Illustration 8 | g00620503 |
- Remove bearing (14) from housing (13) .
Show/hide table
Illustration 9 | g00620504 |
- Remove three rings (15) from hub (7) .
Show/hide table
Illustration 10 | g00620505 |
- Remove bearing (16) from the hub.
- Remove bolts (17) and remove plate (18) from housing (13) .
Note: Bolts (19) hold a spring under compression behind the piston. Bolts (17) must be removed before bolts (19).
Show/hide table
Illustration 11 | g00620525 |
- Remove brake plates (20) and friction discs (21) from the housing.
Show/hide table
Illustration 12 | g00620520 |
- Remove bolts (19) and manifold assembly (22) from housing (13) .
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
Note: Bolts (19) hold a spring under compression. Carefully loosen bolts (19).
Show/hide table
Illustration 13 | g00620528 |
- Remove seals (23) and (24) from manifold assembly (22) .
Show/hide table
Illustration 14 | g00620529 |
- Remove piston (25) from housing (13) .
Show/hide table
Illustration 15 | g00620530 |
- Remove springs (26) from housing (13) .
Show/hide table
Illustration 16 | g00620531 |
Note: Note the direction of spring (26) before the spring is removed.
- Remove O-ring seals (27) and (28) .
Caterpillar Information System:
793C Off-Highway Truck/Tractor Power Train Lockup Clutch and Synchronizing Valve - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Charging System - Test
3524B Engines for Off-Highway Trucks Low Engine Oil Pressure
572R Pipelayer Power Train Idler - Assemble
517 Track-Type Skidder Engine Supplement Muffler and Exhaust Extension - Remove and Install
572R Pipelayer Power Train Idler - Disassemble
517 Track-Type Skidder Engine Supplement Hood - Remove and Install
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Install
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Assemble
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Disassemble
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Remove
517 Track-Type Skidder Engine Supplement Fuel Priming Pump - Remove and Install
3524B Engines for Off-Highway Trucks Coolant Temperature Is Too High
517 Track-Type Skidder Engine Supplement Radiator Guard - Remove
517 Track-Type Skidder Engine Supplement Radiator - Remove
517 Track-Type Skidder Engine Supplement Radiator - Disassemble
517 Track-Type Skidder Engine Supplement Radiator - Assemble
517 Track-Type Skidder Engine Supplement Radiator - Install
517 Track-Type Skidder Engine Supplement Radiator Guard - Install
517 Track-Type Skidder Engine Supplement Turbocharger - Remove and Install
517 Track-Type Skidder Engine Supplement Water Pump - Remove
517 Track-Type Skidder Engine Supplement Water Pump - Disassemble
517 Track-Type Skidder Engine Supplement Water Pump - Assemble
517 Track-Type Skidder Engine Supplement Water Pump - Install