Radiator - Install
Installation Procedure
Show/hide table
Illustration 1 | g00560678 |
- The weight of the radiator is approximately 41 kg (90 lb). Use two people to position the radiator in guard assembly (10) .
- Install two bolts (9) and the washers on each side of radiator guard assembly (10). Install two bolts and washers on the bottom of the radiator (not shown).
- Install bolts, washers, and brackets (7) and shield assemblies (8) .
Show/hide table
Illustration 2 | g00560677 |
- Install drain hose (6) and hose clamp (5) .
Show/hide table
Illustration 3 | g00560675 |
- Install lower tube assembly (3) and hose clamp (4) .
- Install upper tube assembly (1) and hose clamp (2) .
Show/hide table
Illustration 4 | g00560674 |
End By: Install the radiator guard.
Caterpillar Information System:
517 Track-Type Skidder Engine Supplement Radiator - Assemble
517 Track-Type Skidder Engine Supplement Radiator - Disassemble
517 Track-Type Skidder Engine Supplement Radiator - Remove
517 Track-Type Skidder Engine Supplement Radiator Guard - Remove
3524B Engines for Off-Highway Trucks Coolant Temperature Is Too High
572R Pipelayer Power Train Steering Clutch and Brake - Disassemble
793C Off-Highway Truck/Tractor Power Train Lockup Clutch and Synchronizing Valve - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Charging System - Test
3524B Engines for Off-Highway Trucks Low Engine Oil Pressure
572R Pipelayer Power Train Idler - Assemble
517 Track-Type Skidder Engine Supplement Muffler and Exhaust Extension - Remove and Install
572R Pipelayer Power Train Idler - Disassemble
517 Track-Type Skidder Engine Supplement Radiator Guard - Install
517 Track-Type Skidder Engine Supplement Turbocharger - Remove and Install
517 Track-Type Skidder Engine Supplement Water Pump - Remove
517 Track-Type Skidder Engine Supplement Water Pump - Disassemble
517 Track-Type Skidder Engine Supplement Water Pump - Assemble
517 Track-Type Skidder Engine Supplement Water Pump - Install
554 Forwarder and 574 Forwarder Stopping the Engine if an Electrical Malfunction Occurs
784C and 785C Off-Highway Trucks Machine Systems Wiper Arm - Remove and Install
517 Track-Type Skidder Engine Supplement Water Temperature Regulator - Remove and Install
572R Pipelayer Power Train Steering Clutch and Brake - Assemble
784C and 785C Off-Highway Trucks Machine Systems Slack Adjuster (Front) - Remove
572R Pipelayer Power Train Power Train Oil Pump - Disassemble