Fuel Transfer Pump - Assemble
Assembly Procedure
Show/hide table
| NOTICE |
|---|
Be sure that all parts of the fuel transfer pump are clean before assembly. |
Show/hide table
 | |
| Illustration 1 | g00558644 |
- Install valve assembly (18) into housing (1) .
- Put clean diesel fuel on seal (19). Install the seal onto cover (17). Use the two screws to install cover (17) onto housing (1) .
Show/hide table
 | |
| Illustration 2 | g00559783 |
- Put clean diesel fuel on seal (8). Install the seal and guide and tappet assembly (9) in housing (1) .
Show/hide table
 | |
| Illustration 3 | g00558622 |
- Put clean diesel fuel on O-ring seal (11). Install the seal onto sleeve (10). Install sleeve (10) in housing (1) .
- Install piston (12) in sleeve (10) .
- Put clean diesel fuel on seal (13). Put the seal, valve assembly (14), and washer (15) into position in piston (10) .
- Put clean diesel fuel on O-ring seals (4) and (5). Install the O-ring seals and valve assembly (6) into cover (3) .
Show/hide table
 | |
| Illustration 4 | g00558620 |
- Put the spring and cover (2) in position on housing (1) and install the bolts.
Show/hide table
 | |
| Illustration 5 | g00558619 |
End By: Install the fuel transfer pump.
Caterpillar Information System:
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Disassemble
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Remove
517 Track-Type Skidder Engine Supplement Fuel Priming Pump - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Steering Accumulator - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Hydraulic Control Valve - Remove
3500B and 3500B High Displacement Generator Set Engines Oil Contains Coolant
3524B Engines for Off-Highway Trucks Fuel in Cooling System
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Pressure Switch (Service Brake and Retarder)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Pressure Switch (Secondary Brake and Parking Brake)
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Front Support - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Temperature Sensor (Brake Oil)
3176C and 3196 Industrial Engines Speed/Timing Sensor - Remove and Install
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Install
517 Track-Type Skidder Engine Supplement Hood - Remove and Install
572R Pipelayer Power Train Idler - Disassemble
517 Track-Type Skidder Engine Supplement Muffler and Exhaust Extension - Remove and Install
572R Pipelayer Power Train Idler - Assemble
3524B Engines for Off-Highway Trucks Low Engine Oil Pressure
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Charging System - Test
793C Off-Highway Truck/Tractor Power Train Lockup Clutch and Synchronizing Valve - Disassemble
572R Pipelayer Power Train Steering Clutch and Brake - Disassemble
3524B Engines for Off-Highway Trucks Coolant Temperature Is Too High
517 Track-Type Skidder Engine Supplement Radiator Guard - Remove
517 Track-Type Skidder Engine Supplement Radiator - Remove