Fuel Transfer Pump - Install
Installation Procedure
- Inspect the O-ring seal for the fuel transfer pump. If the seal is damaged or worn, install a new seal. Install the O-ring seal on the fuel transfer pump.
- Put fuel transfer pump (3) in position on the fuel injection pump and install bolts (6) .
Show/hide table
Illustration 1 | g00558549 |
- Connect fuel lines (4) and (5) to fuel transfer pump (3) .
Show/hide table
Illustration 2 | g00558545 |
- Open the access door and push the knob for the fuel supply valve all the way inward in order to open the valve. Prime the fuel system.
Note: Refer to the Operation and Maintenance Manual, SEBU7156, "Fuel System - Prime" for the proper procedure to prime the fuel system.
Show/hide table
Illustration 3 | g00555919 |
- Put engine access panel (1) in position and install six bolts (2) .
Show/hide table
Illustration 4 | g00555479 |
Caterpillar Information System:
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Assemble
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Disassemble
517 Track-Type Skidder Engine Supplement Fuel Transfer Pump - Remove
517 Track-Type Skidder Engine Supplement Fuel Priming Pump - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Steering Accumulator - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Hydraulic Control Valve - Remove
3500B and 3500B High Displacement Generator Set Engines Oil Contains Coolant
3524B Engines for Off-Highway Trucks Fuel in Cooling System
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Pressure Switch (Service Brake and Retarder)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Pressure Switch (Secondary Brake and Parking Brake)
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Front Support - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Temperature Sensor (Brake Oil)
517 Track-Type Skidder Engine Supplement Hood - Remove and Install
572R Pipelayer Power Train Idler - Disassemble
517 Track-Type Skidder Engine Supplement Muffler and Exhaust Extension - Remove and Install
572R Pipelayer Power Train Idler - Assemble
3524B Engines for Off-Highway Trucks Low Engine Oil Pressure
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Charging System - Test
793C Off-Highway Truck/Tractor Power Train Lockup Clutch and Synchronizing Valve - Disassemble
572R Pipelayer Power Train Steering Clutch and Brake - Disassemble
3524B Engines for Off-Highway Trucks Coolant Temperature Is Too High
517 Track-Type Skidder Engine Supplement Radiator Guard - Remove
517 Track-Type Skidder Engine Supplement Radiator - Remove
517 Track-Type Skidder Engine Supplement Radiator - Disassemble