Stopping the Machine
- Move the transmission direction switch to the NEUTRAL position.
- Place the machine in roading mode by pressing the mode switch on the right hand control unit.
Show/hide table
Illustration 1 | g00948648 |
- Press the parking brake switch in order to engage the parking brake. This will also lower the ladder.
Reference: Refer to Operation and Maintenance Manual, "Operator Controls" for more information.
- Place the boom into the stored position.
Show/hide table
Illustration 2 | g00948637 |
Stored position without a load |
When the machine is not loaded, the grapple must be resting on the bed of the rear frame.
Show/hide table
Illustration 3 | g00887499 |
Stored position with a partial load |
When the machine is partly loaded, the boom must be lowered on top of the logs and resting on the top of the logs, as shown.
Note: The damper must not rest against the stop when the grapple is stored.
Caterpillar Information System:
793C Off-Highway Truck/Tractor Power Train Lateral Control Rod (Rear Axle Housing) - Assemble
517 Track-Type Skidder Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
517 Track-Type Skidder Engine Supplement Fan Drive - Assemble
517 Track-Type Skidder Engine Supplement Fan Drive - Disassemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Service and Parking Brake (Rear)
517 Track-Type Skidder Engine Supplement Engine Oil Filter and Base - Install
517 Track-Type Skidder Engine Supplement Engine Oil Filter Base - Disassemble
517 Track-Type Skidder Engine Supplement Engine Oil Filter Base - Assemble
517 Track-Type Skidder Engine Supplement Engine Oil Filter and Base - Remove
517 Track-Type Skidder Engine Supplement Engine and Torque Converter - Remove
517 Track-Type Skidder Engine Supplement Engine and Torque Converter - Install
517 Track-Type Skidder Engine Supplement Electric Starting Motor - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Swing Drive - Disassemble
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Oil in Cooling System
793C and 793C XQ Off-Highway Trucks Hydraulic System Relief Valve (Brake Oil Cooler) - Test and Adjust
980G Wheel Loader Power Train Axle Shaft - Remove and Install
824G , 825G and 826G Landfill Compactor Cleaner Bar Tips - Replace
784C and 785C Off-Highway Trucks Machine Systems Window Wiper Motor - Remove and Install
3176C and 3196 Industrial Engines Engine Oil Pressure Sensor - Remove and Install
3176C and 3196 Industrial Engines Speed/Timing Sensor - Remove and Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Temperature Sensor (Brake Oil)
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Front Support - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Pressure Switch (Secondary Brake and Parking Brake)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Pressure Switch (Service Brake and Retarder)