Ditching
Show/hide table
Illustration 1 | g00863975 |
Tilt the blade until the low corner of the blade will remove enough material in order to leave a smooth path for the tires.
Repeat this process until the ditch reaches the desired depth. Spread the windrow. Clean the existing ditches in the same manner.
Show/hide table
Illustration 2 | g00038754 |
Establish the ditch line. Doze at right angles to the ditch's center line.
Doze the length of the ditch in order to smooth the sides of the ditch. This process will also smooth the bottom of the ditch. This process should be done after the ditch has reached the desired depth.
Caterpillar Information System:
844 Wheel Dozer Bulldozing
834B and 836 Landfill Compactor Parking Brake
834B and 836 Landfill Compactor After Starting Engine
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting with Jump Start Cables
834B and 836 Landfill Compactor Window Washer Reservoir - Fill
938G Wheel Loader and IT38G Integrated Toolcarrier Windows - Clean
834B and 836 Landfill Compactor Window Wiper - Inspect/Replace
834B and 836 Landfill Compactor Transmission Oil Level - Check
834B and 836 Landfill Compactor Starting Below 0°C (32°F)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Seat Belt - Inspect
834B and 836 Landfill Compactor Transmission Oil Filter - Replace
834B and 836 Landfill Compactor Rollover Protective Structure (ROPS) - Inspect
844 Wheel Dozer Side Hill Cut
844 Wheel Dozer Tree or Brush Removal
834B and 836 Landfill Compactor Landfill Compacting
824G , 825G and 826G Landfill Compactor Push Loading
834B and 836 Landfill Compactor Secondary Steering - If Equipped
834B and 836 Landfill Compactor Starting with Auxiliary Start Receptacle
834B and 836 Landfill Compactor Throttle Lock Control
834B and 836 Landfill Compactor Engine Water Pump - Inspect
834B and 836 Landfill Compactor Fuel System Primary Filter (Water Separator) - Drain
854G Wheel Dozer Turbocharger - Inspect
561M Pipelayer Track Pins - Inspect
561M Pipelayer Track Roller Frame Guides - Inspect