Throttle Lock Control
The throttle lock allows the operator to set a desired engine rpm. The throttle lock can be used in the following manners:
- The throttle lock can be set at the desired high rpm. This allows the engine to run at a continuous high rpm in order to provide maximum hydraulic power.
- The throttle lock can be set for a desired low rpm. The operator may prefer to use the throttle control but the operator would also prefer to set a higher engine idle. The operator can release the throttle control in order to make directional changes. Releasing the throttle control only lowers the engine rpm to the desired throttle setting.
Set the Throttle Lock
Show/hide table
Illustration 1 | g00038811 |
Show/hide table
Illustration 2 | g00038813 |
The following procedure is the first method of setting the throttle lock:
- Push the top of on/off switch (1) in order to turn on the throttle lock.
- Depress the governor pedal in order to achieve the desired engine rpm.
- Depress button (2) in order to set the throttle.
The following procedure is the second method of setting the throttle lock:
- Push the top of on/off switch (1) in order to turn on the throttle lock.
- Depress button (3) and hold button (3) until the desired rpm is achieved.
- Release button (3) when the desired rpm is achieved.
Show/hide table
Illustration 3 | g00038815 |
The indicator light for the throttle lock is illuminated when the on/off switch is in the ON position.
Cancel a Throttle Setting
The throttle setting may be cancelled by depressing the right brake pedal or by moving on/off switch (1) to the OFF position.
Resume a Throttle Setting
When the right brake pedal is used to cancel a throttle setting, depress button (3) in order to resume the throttle setting.
Caterpillar Information System:
834B and 836 Landfill Compactor Starting with Auxiliary Start Receptacle
834B and 836 Landfill Compactor Secondary Steering - If Equipped
824G , 825G and 826G Landfill Compactor Push Loading
834B and 836 Landfill Compactor Landfill Compacting
844 Wheel Dozer Tree or Brush Removal
844 Wheel Dozer Side Hill Cut
844 Wheel Dozer Ditching
844 Wheel Dozer Bulldozing
834B and 836 Landfill Compactor Parking Brake
834B and 836 Landfill Compactor After Starting Engine
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting with Jump Start Cables
834B and 836 Landfill Compactor Window Washer Reservoir - Fill
834B and 836 Landfill Compactor Engine Water Pump - Inspect
834B and 836 Landfill Compactor Fuel System Primary Filter (Water Separator) - Drain
854G Wheel Dozer Turbocharger - Inspect
561M Pipelayer Track Pins - Inspect
561M Pipelayer Track Roller Frame Guides - Inspect
793B Off-Highway Truck Seat Belt - Inspect
834B and 836 Landfill Compactor Refill Capacities
322B, 322B L, 325B and 325B L Excavators Decommissioning and Disposal
834B and 836 Landfill Compactor Caterpillar Reference Material
515 Wheel Skidder and 525 Wheel Skidder Additional Reference Material
834B and 836 Landfill Compactor Power Guard Control
561M Pipelayer Seat Belt