Rollover Protective Structure (ROPS) - Inspect
Show/hide table
Illustration 1 | g00275513 |
- Remove the two bolts that hold the access covers on each side of the machine.
Show/hide table
Illustration 2 | g00275504 |
- Look for bolts that are loose, damaged, or missing. Replace the damaged bolts and any missing bolts with original equipment parts only.
Show/hide table
Illustration 3 | g00275696 |
- Tighten two bolts (1) to a torque of 900 ± 100 N·m (665 ± 75 lb ft). Tighten eight bolts (2) to a torque of 1300 ± 150 N·m (960 ± 110 lb ft).
Repeat this procedure for the other sides of the ROPS.
Note: Apply oil to all ROPS bolt threads before you install the bolt. Failure to apply oil can result in improper bolt torque.
- Drive the machine on a rough surface. If the ROPS mounting supports rattle, replace the ROPS mounting supports.
- Install the access covers.
Note: Do not repair the ROPS by welding reinforcement plates to the ROPS. Consult your Caterpillar dealer for repair of cracks in any welds, in any castings, or in any metal section of the ROPS.
Caterpillar Information System:
834B and 836 Landfill Compactor Transmission Oil - Change
836G Landfill Compactor and 834G Wheel Dozer Lift Cylinder Lower Swivel Bearing - Lubricate
834B and 836 Landfill Compactor Indicators and Gauges - Test
D6R Track-Type Tractor Engine Starting
834B and 836 Landfill Compactor Hydraulic System Oil Level - Check
834B and 836 Landfill Compactor Radiator Grill - Clean
631E Series II Wheel Tractor-Scrapers Before Starting Engine
834B and 836 Landfill Compactor Seat Suspension - Lubricate
834B and 836 Landfill Compactor Hydraulic System Oil Filter (Tank Filter) - Replace
834B and 836 Landfill Compactor Lift Cylinder Upper Trunnion Bearing - Lubricate
834B and 836 Landfill Compactor Hydraulic System Oil - Change
834B and 836 Landfill Compactor Steering Cylinder Bearings - Lubricate
834B and 836 Landfill Compactor Transmission Oil Filter - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Seat Belt - Inspect
834B and 836 Landfill Compactor Starting Below 0°C (32°F)
834B and 836 Landfill Compactor Transmission Oil Level - Check
834B and 836 Landfill Compactor Window Wiper - Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Windows - Clean
834B and 836 Landfill Compactor Window Washer Reservoir - Fill
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting with Jump Start Cables
834B and 836 Landfill Compactor After Starting Engine
834B and 836 Landfill Compactor Parking Brake
844 Wheel Dozer Bulldozing
844 Wheel Dozer Ditching