Transmission Oil Level - Check
- Open the access door on the platform behind the cab.
Show/hide table
 | |
| Illustration 1 | g00275236 |
- Check the oil level on dipstick (1). Maintain the oil between the "FULL" mark and the "LOW" mark.
Show/hide table
 | |
| Illustration 2 | g00275260 |
- If necessary, remove filler cap (2) and add oil.
- Close the access door.
Caterpillar Information System:
834B and 836 Landfill Compactor Starting Below 0°C (32°F)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Seat Belt - Inspect
834B and 836 Landfill Compactor Transmission Oil Filter - Replace
834B and 836 Landfill Compactor Rollover Protective Structure (ROPS) - Inspect
834B and 836 Landfill Compactor Transmission Oil - Change
836G Landfill Compactor and 834G Wheel Dozer Lift Cylinder Lower Swivel Bearing - Lubricate
834B and 836 Landfill Compactor Indicators and Gauges - Test
D6R Track-Type Tractor Engine Starting
834B and 836 Landfill Compactor Hydraulic System Oil Level - Check
834B and 836 Landfill Compactor Radiator Grill - Clean
631E Series II Wheel Tractor-Scrapers Before Starting Engine
834B and 836 Landfill Compactor Seat Suspension - Lubricate
834B and 836 Landfill Compactor Window Wiper - Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Windows - Clean
834B and 836 Landfill Compactor Window Washer Reservoir - Fill
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting with Jump Start Cables
834B and 836 Landfill Compactor After Starting Engine
834B and 836 Landfill Compactor Parking Brake
844 Wheel Dozer Bulldozing
844 Wheel Dozer Ditching
844 Wheel Dozer Side Hill Cut
844 Wheel Dozer Tree or Brush Removal
834B and 836 Landfill Compactor Landfill Compacting
824G , 825G and 826G Landfill Compactor Push Loading