Structural Paint On Lift Arms
Usage:
WHEEL LOADERS938G (6WS),
IT38G (1CW),
950G (2JS, 5FW),
962G (7BW, 3BS) WHEEL LOADERS
IT38G (1CW),
950G (2JS, 5FW),
962G (7BW, 3BS) WHEEL LOADERS
Problem:
No procedure to touchup structured paint was available.
Solution:
Here is the procedure to touchup structured paint for lift arms:
Reference: SIGMA...: UC 5063-3117
Product Description
- - Structured primer based on epoxy-ester resin
- - One pack quick air drying
- - To cover up some manufacturing faults of the surface
- - Chrome and lead free
- - Recoatable by alkyd / acrylic modified alkyd and polyurethane topcoats
- - Good anticorrosion properties
- - One pack quick air drying
How to supply the product
- - SIGMA-COATINGS: Phone 32 (0) 64 51 76 70
- - Available conditioning: 1/2 L / 5 L cans
How to touchup
- - All free particles to be removed
- - Scratched area cleaning:
- * degreasing
- * rinsing
- * blowing up
- * drying
- * rinsing
- - Before use, paint to be correctly agitated
- - Manual application
- * adapted roller or foam sponge
- * viscosity of 35-40 seconds Din 4 at 22 degrees
- * to thin, use xylene or equivalent
- * viscosity of 35-40 seconds Din 4 at 22 degrees
- - Gun application
- * round nozzle with 2,8 and 4,2 mm openings
- * conventional air
- * pression of ± 4 bars
- * conventional air
- - Thickness to be reached: ± 50 microns
- - Air drying (10-15 minutes)
- - Topcoat recovering (20-30 microns)
- - Air drying
- - Scratched area cleaning:
CATERPILLAR BELGIUM WHEEL LOADER TEAM COPYRIGHT 1998 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Excess Material Causing Interference Between Hoist Cylinder Rod Eyes And Body Hoist Bracket Excess Material Causing Interference Between Hoist Cylinder Rod Eyes And Body Hoist Bracket
Brake Oil Cooler Guide Brake Oil Cooler Guide
137-9822 Sonic Sensor For Feeder System May Not Perform Adequately 137-9822 Sonic Sensor For Feeder System May Not Perform Adequately
Truck Payload Measurement System Downloading Truck Payload Measurement System Downloading
Checklist To Troubleshoot Low Power Complaints Checklist To Troubleshoot Low Power Complaints
Certain AP-650B And BG-225C Asphalt Pavers May Have Difficulty In Steering Under A Heavily Loaded Condition Certain AP-650B And BG-225C Asphalt Pavers May Have Difficulty In Steering Under A Heavily Loaded Condition
Pivot On Three-Point Hitch May Fail Pivot On Three-Point Hitch May Fail
The Suction Pipe Fitted Into The Fuel Tank Needs To Be Checked The Suction Pipe Fitted Into The Fuel Tank Needs To Be Checked
Drum Mount Fasteners Need To Be Checked Drum Mount Fasteners Need To Be Checked
Transmission Neutralization Transmission Neutralization
Adjustment Of The Brake Packs Adjustment Of The Brake Packs
Pavers May Have Incorrect Grade Timer Delay Relay Installed Pavers May Have Incorrect Grade Timer Delay Relay Installed
Cab Air Filter Cab Air Filter
Transmission May Not Downshift Correctly Transmission May Not Downshift Correctly
Intermittent Loss Of Steering On Two Wheel Drive Two Wheel Steer C-Series Backhoe Loaders Intermittent Loss Of Steering On Two Wheel Drive Two Wheel Steer C-Series Backhoe Loaders
1R-1124 Driver Wheel May Have Lug Nuts Come Loose 1R-1124 Driver Wheel May Have Lug Nuts Come Loose
New Muffler, Stack, And Clamp Installed On Some Backhoe Loaders New Muffler, Stack, And Clamp Installed On Some Backhoe Loaders
Aftercooler Coolant Hose Clamps May Be Incorrectly Tightened Aftercooler Coolant Hose Clamps May Be Incorrectly Tightened
Air Conditioner Leaking Condensation Into Cab Air Conditioner Leaking Condensation Into Cab
108-2402 Slope Sensor May Have The Wrong Time Constants 108-2402 Slope Sensor May Have The Wrong Time Constants
Difficult Installation Of Counterweight Retainer Rods Difficult Installation Of Counterweight Retainer Rods
Speed Of Outriggers Speed Of Outriggers
Bolts Loosening - A-Frame To Axle Housing On Center And Rear Axles Bolts Loosening - A-Frame To Axle Housing On Center And Rear Axles
Two Different Designs For Tow Point Roller Two Different Designs For Tow Point Roller