Difficult Installation Of Counterweight Retainer Rods
Usage:
TRACK-TYPE TRACTORS583R (2XS1-UP) PIPELAYERS
Problem:
The retainer rod holes in the counterweight assemblies may be too small. The retainer rods may not be able to pass through the counterweight slabs into the counterweight frame assembly during installation.
Solution:
The counterweight assemblies 134-9958 and 134-9959 can be modified by increasing the size of the retainer rod holes. The diameter should be increased from 70.0 mm (2.76 inch) to 105.0 mm (4.13 inch).
COPYRIGHT 1998 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
108-2402 Slope Sensor May Have The Wrong Time Constants 108-2402 Slope Sensor May Have The Wrong Time Constants
Air Conditioner Leaking Condensation Into Cab Air Conditioner Leaking Condensation Into Cab
Aftercooler Coolant Hose Clamps May Be Incorrectly Tightened Aftercooler Coolant Hose Clamps May Be Incorrectly Tightened
New Muffler, Stack, And Clamp Installed On Some Backhoe Loaders New Muffler, Stack, And Clamp Installed On Some Backhoe Loaders
1R-1124 Driver Wheel May Have Lug Nuts Come Loose 1R-1124 Driver Wheel May Have Lug Nuts Come Loose
Intermittent Loss Of Steering On Two Wheel Drive Two Wheel Steer C-Series Backhoe Loaders Intermittent Loss Of Steering On Two Wheel Drive Two Wheel Steer C-Series Backhoe Loaders
Transmission May Not Downshift Correctly Transmission May Not Downshift Correctly
Cab Air Filter Cab Air Filter
Structural Paint On Lift Arms Structural Paint On Lift Arms
Excess Material Causing Interference Between Hoist Cylinder Rod Eyes And Body Hoist Bracket Excess Material Causing Interference Between Hoist Cylinder Rod Eyes And Body Hoist Bracket
Brake Oil Cooler Guide Brake Oil Cooler Guide
137-9822 Sonic Sensor For Feeder System May Not Perform Adequately 137-9822 Sonic Sensor For Feeder System May Not Perform Adequately
Speed Of Outriggers Speed Of Outriggers
Bolts Loosening - A-Frame To Axle Housing On Center And Rear Axles Bolts Loosening - A-Frame To Axle Housing On Center And Rear Axles
Two Different Designs For Tow Point Roller Two Different Designs For Tow Point Roller
Correct Machining Of The 130-9004 Intake Valve Seat Insert Correct Machining Of The 130-9004 Intake Valve Seat Insert
9U-4270 Dentension Lock Will Not Fit On Tensioner Rod 9U-4270 Dentension Lock Will Not Fit On Tensioner Rod
Propel Pump Seal Leak Propel Pump Seal Leak
Camshaft Injector Lifter (Roller Follower) Assembly Replacement Camshaft Injector Lifter (Roller Follower) Assembly Replacement
Removing Invalid Service Codes (MID 030, CID 511, FMI 55) Removing Invalid Service Codes (MID 030, CID 511, FMI 55)
New Hydraulic Electronic Control Improves Blade Control New Hydraulic Electronic Control Improves Blade Control
Drive Wheel And Axle Bolts May Loosen Drive Wheel And Axle Bolts May Loosen
Noise In Differential Or Copper In Power-Train Oil Noise In Differential Or Copper In Power-Train Oil
An Incorrect Oil Level Into The Drum Support Bearing Housing May Create External Leakages An Incorrect Oil Level Into The Drum Support Bearing Housing May Create External Leakages