8I-3432 Brake Control Group And 136-8544 Service Brake Cylinder Group
Usage:
TELEHANDLERTH62 (3LN653-UP, 4TM905-UP),
TH63 (3NN548-UP, 5WM1021-UP),
TH82 (3JN508-UP, 3KN432-UP),
TH83 (3RN597-UP),
TH103 (3PN388-UP) TELEHANDLERS
TH63 (3NN548-UP, 5WM1021-UP),
TH82 (3JN508-UP, 3KN432-UP),
TH83 (3RN597-UP),
TH103 (3PN388-UP) TELEHANDLERS
Problem:
The 8I-3432 Brake Control Group and 136-8544 Service Brake Cylinder Group are not listed in a parts manual. The link assembly which is not listed is in the process of being released.
Solution:
The 8I-3432 Brake Control Group and the 136-8537 Brake Control Group have been improved and are being installed in current production machines. This article details parts consist for these improvements. See the Illustration 1, Chart 1 and Illustration 2, Chart 2 for the parts Consist.
Illustration 1. 8I-3432 Brake Control Group. See Chart 1.
Chart 1
Illustration 2. 136-8544 Service Brake Cylinder Group. See Chart 2.
Chart 2
COPYRIGHT 1997 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Some 9X-7803 Alternators Were Mislabeled As 8C-6163 Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Remanufacturing Water Pumps For The 3300 Family Of Engines Remanufacturing Water Pumps For The 3300 Family Of Engines
Assembly Procedure For 777D Off-Highway Trucks - Form no. SEHS9997 - October 1996 Assembly Procedure For 777D Off-Highway Trucks - Form no. SEHS9997 - October 1996
Specifications Manual For 777D Off-Highway Trucks - Form no. SENR6911 - May 1996 Specifications Manual For 777D Off-Highway Trucks - Form no. SENR6911 - May 1996
Carriage Rotate Pins Can Be Protected From Damage By Adding A Restraint Carriage Rotate Pins Can Be Protected From Damage By Adding A Restraint
O-Rings Failing In Accumulator Charging Valve For Cartridge Groups O-Rings Failing In Accumulator Charging Valve For Cartridge Groups
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Grease Fittings May Have Been Over Tightened On Automatic Lubrication Injectors Grease Fittings May Have Been Over Tightened On Automatic Lubrication Injectors
Idler/Bogie Roller Bearings Idler/Bogie Roller Bearings
The Transmission Control May Log An Erroneous Service Code For The Starter Relay (Service Code: MID 081, CID 638, FMI 05) The Transmission Control May Log An Erroneous Service Code For The Starter Relay (Service Code: MID 081, CID 638, FMI 05)
Propel Pump Drive Hubs Propel Pump Drive Hubs
Backhoe Loader Booms Backhoe Loader Booms
Brake Purging Procedure For 8I-3432 Brake Control Group Brake Purging Procedure For 8I-3432 Brake Control Group
Tilt Cylinders May Form A Void During Some Applications Tilt Cylinders May Form A Void During Some Applications
Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui) Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui)
Do Not Wash Fuel Pump With Cold Water Do Not Wash Fuel Pump With Cold Water
Activating The Transmission Neutralizer Function Activating The Transmission Neutralizer Function
Transmission Drain Plug Access Transmission Drain Plug Access
Excessive Wear And Breakage Of 124-6639 Thrust Plate In 125-3427 Pump Drive Group (HEUI Hydraulic Pump Drive) Excessive Wear And Breakage Of 124-6639 Thrust Plate In 125-3427 Pump Drive Group (HEUI Hydraulic Pump Drive)
Hitch Bolt Torque May Be Incorrect Hitch Bolt Torque May Be Incorrect
Incorrect Engine Temperature Readings Incorrect Engine Temperature Readings
Improved Lubricaiton Flow Through The Inner Rear Wheel Bearing Improved Lubricaiton Flow Through The Inner Rear Wheel Bearing
Increased Power Train Oil FLow Can Decrease Final Drive Oil Temperature Increased Power Train Oil FLow Can Decrease Final Drive Oil Temperature
European Union Directive 95/27/EC, External Dynamic Sound European Union Directive 95/27/EC, External Dynamic Sound