Specifications Manual For 777D Off-Highway Trucks - Form no. SENR6911 - May 1996
Usage:
OFF-HIGHWAY TRUCKS77D (3PR1-Up)
Problem:
- 1. Please delete the following note in the Specifications Manual, page 38:
Quote
NOTE: Apply 4C-5592 Anti-Seize Compound to faces of washers and threads of nuts (2), nuts (3) and bolts before assembly. If 4C-5592 Anti-Sieze Compound is not available do not use any other type of lubricant. Clean the bolts, nuts and washers with solvent.
Unquote
Solution:
- 1a. And replace with the following note, page 38:
Quote
NOTE: Apply 4C-5592 Anti-Seize Compound to faces of Washers and Threads of nuts (2) and bolts (3) before assembly. The use of 4C-5592 Anti-Seize Compound is a requirement of "PROPER ASSEMBLY" and "PROPER TORQUE".
Unquote
COSA LARGE AND CORE PRODUCT DIVISION COPYRIGHT 1997 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Carriage Rotate Pins Can Be Protected From Damage By Adding A Restraint Carriage Rotate Pins Can Be Protected From Damage By Adding A Restraint
O-Rings Failing In Accumulator Charging Valve For Cartridge Groups O-Rings Failing In Accumulator Charging Valve For Cartridge Groups
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Grease Fittings May Have Been Over Tightened On Automatic Lubrication Injectors Grease Fittings May Have Been Over Tightened On Automatic Lubrication Injectors
Idler/Bogie Roller Bearings Idler/Bogie Roller Bearings
The Transmission Control May Log An Erroneous Service Code For The Starter Relay (Service Code: MID 081, CID 638, FMI 05) The Transmission Control May Log An Erroneous Service Code For The Starter Relay (Service Code: MID 081, CID 638, FMI 05)
Propel Pump Drive Hubs Propel Pump Drive Hubs
Backhoe Loader Booms Backhoe Loader Booms
All Wheel Steer, Loader Lift / Steer Interaction All Wheel Steer, Loader Lift / Steer Interaction
Lower Alternator Mounting Bracket Lower Alternator Mounting Bracket
Improvements Made To 1G4704 Grip Assembly Improvements Made To 1G4704 Grip Assembly
Over Tightened Clamps On Engine Air Inlet Lines Over Tightened Clamps On Engine Air Inlet Lines
Assembly Procedure For 777D Off-Highway Trucks - Form no. SEHS9997 - October 1996 Assembly Procedure For 777D Off-Highway Trucks - Form no. SEHS9997 - October 1996
Remanufacturing Water Pumps For The 3300 Family Of Engines Remanufacturing Water Pumps For The 3300 Family Of Engines
Some 9X-7803 Alternators Were Mislabeled As 8C-6163 Some 9X-7803 Alternators Were Mislabeled As 8C-6163
8I-3432 Brake Control Group And 136-8544 Service Brake Cylinder Group 8I-3432 Brake Control Group And 136-8544 Service Brake Cylinder Group
Brake Purging Procedure For 8I-3432 Brake Control Group Brake Purging Procedure For 8I-3432 Brake Control Group
Tilt Cylinders May Form A Void During Some Applications Tilt Cylinders May Form A Void During Some Applications
Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui) Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui)
Do Not Wash Fuel Pump With Cold Water Do Not Wash Fuel Pump With Cold Water
Activating The Transmission Neutralizer Function Activating The Transmission Neutralizer Function
Transmission Drain Plug Access Transmission Drain Plug Access
Excessive Wear And Breakage Of 124-6639 Thrust Plate In 125-3427 Pump Drive Group (HEUI Hydraulic Pump Drive) Excessive Wear And Breakage Of 124-6639 Thrust Plate In 125-3427 Pump Drive Group (HEUI Hydraulic Pump Drive)
Hitch Bolt Torque May Be Incorrect Hitch Bolt Torque May Be Incorrect