Excessive Wear And Breakage Of 124-6639 Thrust Plate In 125-3427 Pump Drive Group (HEUI Hydraulic Pump Drive)
Usage:
ENGINES
3412E (4CR) INDUSTRIAL ENGINES;
D9R (7TL, 8BL),
D10R (3KR) TRACK-TYPE TRACTORS;
24H (7KK) MOTOR GRADERS;
631E (1AB),
633E (2PS) 637E (1FB),
651E (4YR),
657E (, 5YR, 6PR, 6TR, 7KR) WHEEL-TRACTOR SCRAPERS;
769D (5TR),
771D (6JR),
773D (7ER),
775D (6KR) OFF-HIGHWAY TRUCKS;
834B (7BR) WHEEL TRACTORS;
836 (7FR) COMPACTORS;
988F (2ZR),
990 (4FR) WHEEL LOADERS;
5110 (7GN8HN) EXCAVATORS;
PM-565 (3TK) COLD PLANERS
COMPACTORS
MOTOR GRADERS
OFF-HIGHWAY TRUCKS
TRACK-TYPE TRACTORS
WHEEL LOADERS
WHEEL TRACTORS
WHEEL-TRACTOR SCRAPERS
PAVING PRODUCTS
3408E (7PR),3412E (4CR) INDUSTRIAL ENGINES;
D9R (7TL, 8BL),
D10R (3KR) TRACK-TYPE TRACTORS;
24H (7KK) MOTOR GRADERS;
631E (1AB),
633E (2PS) 637E (1FB),
651E (4YR),
657E (, 5YR, 6PR, 6TR, 7KR) WHEEL-TRACTOR SCRAPERS;
769D (5TR),
771D (6JR),
773D (7ER),
775D (6KR) OFF-HIGHWAY TRUCKS;
834B (7BR) WHEEL TRACTORS;
836 (7FR) COMPACTORS;
988F (2ZR),
990 (4FR) WHEEL LOADERS;
5110 (7GN8HN) EXCAVATORS;
PM-565 (3TK) COLD PLANERS
Problem:
There have been reports of the 124-6639 Thrust Plate cracking and breaking. This thrust plate is part of the 125-3427 Pump Drive Group. If the thrust plate cracks of breaks, the engine may log speed sensor faults and/or the engine may not run.
Solution:
A change is forthcoming. In the interim, continue to use the 124-6639 Thrust Plate (1). Continue to use the two 0S-1617 Bolts (2), but replace the two former 9M-1974 Hard Washers (3) with two new 9N-0869 Hard Washers (3)
124-6639 Thrust Plate (1). 0S-1617 Bolts (2). 9N-0869 Hard Washer (3).
125-3427 PUMP DRIVE GROUP
COPYRIGHT 1997 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Transmission Drain Plug Access Transmission Drain Plug Access
Activating The Transmission Neutralizer Function Activating The Transmission Neutralizer Function
Do Not Wash Fuel Pump With Cold Water Do Not Wash Fuel Pump With Cold Water
Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui) Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui)
Tilt Cylinders May Form A Void During Some Applications Tilt Cylinders May Form A Void During Some Applications
Brake Purging Procedure For 8I-3432 Brake Control Group Brake Purging Procedure For 8I-3432 Brake Control Group
8I-3432 Brake Control Group And 136-8544 Service Brake Cylinder Group 8I-3432 Brake Control Group And 136-8544 Service Brake Cylinder Group
Some 9X-7803 Alternators Were Mislabeled As 8C-6163 Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Remanufacturing Water Pumps For The 3300 Family Of Engines Remanufacturing Water Pumps For The 3300 Family Of Engines
Assembly Procedure For 777D Off-Highway Trucks - Form no. SEHS9997 - October 1996 Assembly Procedure For 777D Off-Highway Trucks - Form no. SEHS9997 - October 1996
Specifications Manual For 777D Off-Highway Trucks - Form no. SENR6911 - May 1996 Specifications Manual For 777D Off-Highway Trucks - Form no. SENR6911 - May 1996
Carriage Rotate Pins Can Be Protected From Damage By Adding A Restraint Carriage Rotate Pins Can Be Protected From Damage By Adding A Restraint
Hitch Bolt Torque May Be Incorrect Hitch Bolt Torque May Be Incorrect
Incorrect Engine Temperature Readings Incorrect Engine Temperature Readings
Improved Lubricaiton Flow Through The Inner Rear Wheel Bearing Improved Lubricaiton Flow Through The Inner Rear Wheel Bearing
Increased Power Train Oil FLow Can Decrease Final Drive Oil Temperature Increased Power Train Oil FLow Can Decrease Final Drive Oil Temperature
European Union Directive 95/27/EC, External Dynamic Sound European Union Directive 95/27/EC, External Dynamic Sound
Service Meter Is Clocking Hours When The Machine Is Not Operating Service Meter Is Clocking Hours When The Machine Is Not Operating
PS-150B Cooling Package Modifications PS-150B Cooling Package Modifications
C-Series Backhoe Loader Ride Troubleshooting Guide C-Series Backhoe Loader Ride Troubleshooting Guide
Procedure To Replace Boom Hour Glass Plate Due To Cracks Procedure To Replace Boom Hour Glass Plate Due To Cracks
Hydraulic Oil May Transfer To The Transmission Hydraulic Oil May Transfer To The Transmission
Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings