Service Meter Is Clocking Hours When The Machine Is Not Operating
Usage:
WHEEL LOADERSIT38G (7BS319-UP) INTEGRATED TOOLCARRIERS, 938G (4YS189-UP) WHEEL LOADERS
Problem:
Certain IT38G Integrated Toolcarriers and 938G Wheel Loaders equipped with a 3E-9359 Service Meter, which is part of the 121-1241 Service Meter Kit, may have been wired incorrectly.
Solution:
Insure that red wire (122-RD-18) is connected to terminal 1, black wire (200-BK-18) is connected to terminal 2, and green wire (403-GN-18) is connected to terminal 3.
COPYRIGHT 1997 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
European Union Directive 95/27/EC, External Dynamic Sound European Union Directive 95/27/EC, External Dynamic Sound
Increased Power Train Oil FLow Can Decrease Final Drive Oil Temperature Increased Power Train Oil FLow Can Decrease Final Drive Oil Temperature
Improved Lubricaiton Flow Through The Inner Rear Wheel Bearing Improved Lubricaiton Flow Through The Inner Rear Wheel Bearing
Incorrect Engine Temperature Readings Incorrect Engine Temperature Readings
Hitch Bolt Torque May Be Incorrect Hitch Bolt Torque May Be Incorrect
Excessive Wear And Breakage Of 124-6639 Thrust Plate In 125-3427 Pump Drive Group (HEUI Hydraulic Pump Drive) Excessive Wear And Breakage Of 124-6639 Thrust Plate In 125-3427 Pump Drive Group (HEUI Hydraulic Pump Drive)
Transmission Drain Plug Access Transmission Drain Plug Access
Activating The Transmission Neutralizer Function Activating The Transmission Neutralizer Function
Do Not Wash Fuel Pump With Cold Water Do Not Wash Fuel Pump With Cold Water
Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui) Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui)
Tilt Cylinders May Form A Void During Some Applications Tilt Cylinders May Form A Void During Some Applications
Brake Purging Procedure For 8I-3432 Brake Control Group Brake Purging Procedure For 8I-3432 Brake Control Group
PS-150B Cooling Package Modifications PS-150B Cooling Package Modifications
C-Series Backhoe Loader Ride Troubleshooting Guide C-Series Backhoe Loader Ride Troubleshooting Guide
Procedure To Replace Boom Hour Glass Plate Due To Cracks Procedure To Replace Boom Hour Glass Plate Due To Cracks
Hydraulic Oil May Transfer To The Transmission Hydraulic Oil May Transfer To The Transmission
Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Refrigerant Compressors May Fail Refrigerant Compressors May Fail
Information Survey For Boom Rolling Hose Failures Information Survey For Boom Rolling Hose Failures
Engine Accelerator Cable Rubbing Against Reservoir Engine Accelerator Cable Rubbing Against Reservoir
8T-0855 Brake Pressure Gauge May Fail 8T-0855 Brake Pressure Gauge May Fail
8T-6762 Pipe Plugs Not Correctly Tightened In 9Y-8914 Air Lines Group 8T-6762 Pipe Plugs Not Correctly Tightened In 9Y-8914 Air Lines Group
Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines