Information Survey For Boom Rolling Hose Failures Caterpillar

Information Survey For Boom Rolling Hose Failures

Usage:

TELEHANDLERTH62 (3LN, 4TM) TH63 (3NN, 5WM) TH82 (3JN, 3KN) TH83 (3RN) TH103 (3PN) TELEHANDLERS

Problem:

Additional information is needed to help resolve the rolling hose failure.

Solution:

Please submit a fax response to the service engineering group describing the mode of the failure. The following check list may be useful to define the failures.

IF THERE IS SOME OTHER CAUSE OF THE FAILURE, USE THE ILLUSTRATION AND THE SPACE PROVIDED BELOW TO GIVE THE DETAILS:

FAX A COPY OF THIS TIB TO:

NACD CUSTOMERS-KEN KLEIN OR FRANK JAKLIC
AT (919) 550-3039;
OR GEORGE SADLER
AT 1144-1455-826-911

Caterpillar Information System:

Refrigerant Compressors May Fail Refrigerant Compressors May Fail

Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings

Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly

Hydraulic Oil May Transfer To The Transmission Hydraulic Oil May Transfer To The Transmission

Procedure To Replace Boom Hour Glass Plate Due To Cracks Procedure To Replace Boom Hour Glass Plate Due To Cracks

C-Series Backhoe Loader Ride Troubleshooting Guide C-Series Backhoe Loader Ride Troubleshooting Guide

PS-150B Cooling Package Modifications PS-150B Cooling Package Modifications

Service Meter Is Clocking Hours When The Machine Is Not Operating Service Meter Is Clocking Hours When The Machine Is Not Operating

European Union Directive 95/27/EC, External Dynamic Sound European Union Directive 95/27/EC, External Dynamic Sound

Increased Power Train Oil FLow Can Decrease Final Drive Oil Temperature Increased Power Train Oil FLow Can Decrease Final Drive Oil Temperature

Improved Lubricaiton Flow Through The Inner Rear Wheel Bearing Improved Lubricaiton Flow Through The Inner Rear Wheel Bearing

Incorrect Engine Temperature Readings Incorrect Engine Temperature Readings

Engine Accelerator Cable Rubbing Against Reservoir Engine Accelerator Cable Rubbing Against Reservoir

8T-0855 Brake Pressure Gauge May Fail 8T-0855 Brake Pressure Gauge May Fail

8T-6762 Pipe Plugs Not Correctly Tightened In 9Y-8914 Air Lines Group 8T-6762 Pipe Plugs Not Correctly Tightened In 9Y-8914 Air Lines Group

Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines

Spindle Retaining Bolts On The Suspension Support Axle May Loosen Spindle Retaining Bolts On The Suspension Support Axle May Loosen

Unapproved Refrigerant Use In Caterpillar HVAC Systems May Adversely Effect Air Conditioner Performance Unapproved Refrigerant Use In Caterpillar HVAC Systems May Adversely Effect Air Conditioner Performance

Low Engine Idle Speed Causes Excessive Vibration Low Engine Idle Speed Causes Excessive Vibration

3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life 3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life

Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing

Power Train Oil Flow May Be Lost On Slopes Power Train Oil Flow May Be Lost On Slopes

Rework To Prevent Scoring Of Rods In Hydraulic Cylinder Groups For Rear Struts Rework To Prevent Scoring Of Rods In Hydraulic Cylinder Groups For Rear Struts

Certain 824G Wheel Tractors, 825G Soil Compactors, 826G Landfill Compactors, And 980G Wheel Loaders Experience Brake Application Noise And Pedal Kickback Certain 824G Wheel Tractors, 825G Soil Compactors, 826G Landfill Compactors, And 980G Wheel Loaders Experience Brake Application Noise And Pedal Kickback