Backhoe Loader Booms
Usage:
BACKHOE LOADERS416C (5YN, 1XR),
426C (7WN, 1ZR, 1ER, 1NR),
428C (2CR, 8RN),
436C (9JN, 2BR, 1GR, 1RR),
438C (2DR, 1TR, 9KN, 1JR)
426C (7WN, 1ZR, 1ER, 1NR),
428C (2CR, 8RN),
436C (9JN, 2BR, 1GR, 1RR),
438C (2DR, 1TR, 9KN, 1JR)
Problem:
Confusion of which boom fits which machine, the differences between part numbers.
Solution:
The part numbers:
- 1220775 is used on 428C, 438C with or without universal lines no hammer rest.
- 1221744 is used on 416C without universal lines.
- 1221796 is used on 416C with universal lines and a hammer rest.
- 1221745 is used on 426C, 436C without universal lines.
- 1221797 is used on 426C, 436C with universal lines and a hammer rest.
- 1221744 is used on 416C without universal lines.
NOTE: A hammer rest is a "U" shaped plate welded to the boom foot to support the point of the hammer and is only required on centre pivot machines.
BHL SERVICE ENGINEERING LEICESTER COPYRIGHT 1997 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
All Wheel Steer, Loader Lift / Steer Interaction All Wheel Steer, Loader Lift / Steer Interaction
Lower Alternator Mounting Bracket Lower Alternator Mounting Bracket
Improvements Made To 1G4704 Grip Assembly Improvements Made To 1G4704 Grip Assembly
Over Tightened Clamps On Engine Air Inlet Lines Over Tightened Clamps On Engine Air Inlet Lines
Interference Between New High Pressure Turbocharger Groups And Turbocharger Oil Lines And Turbocharger Water Lines Interference Between New High Pressure Turbocharger Groups And Turbocharger Oil Lines And Turbocharger Water Lines
Automatic Transmission Fluid (ATF) Is Not An Acceptable Lubricant For Flexxaire Fans Automatic Transmission Fluid (ATF) Is Not An Acceptable Lubricant For Flexxaire Fans
Inlet Manifold Pressure For Turbocharged 3054 Machine Engines Inlet Manifold Pressure For Turbocharged 3054 Machine Engines
Cab Door Window Latches Cab Door Window Latches
Remanufactured Water Pumps For 3204 And 3208 Engines Remanufactured Water Pumps For 3204 And 3208 Engines
Installation Of Oil Distributor Sleeves in Telehandler Transmissions Installation Of Oil Distributor Sleeves in Telehandler Transmissions
Product Support Organization For Caterpillar Belgium Medium Wheel Loaders Product Support Organization For Caterpillar Belgium Medium Wheel Loaders
Additional Holes In Cylinder Head Gasket Additional Holes In Cylinder Head Gasket
Propel Pump Drive Hubs Propel Pump Drive Hubs
The Transmission Control May Log An Erroneous Service Code For The Starter Relay (Service Code: MID 081, CID 638, FMI 05) The Transmission Control May Log An Erroneous Service Code For The Starter Relay (Service Code: MID 081, CID 638, FMI 05)
Idler/Bogie Roller Bearings Idler/Bogie Roller Bearings
Grease Fittings May Have Been Over Tightened On Automatic Lubrication Injectors Grease Fittings May Have Been Over Tightened On Automatic Lubrication Injectors
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
O-Rings Failing In Accumulator Charging Valve For Cartridge Groups O-Rings Failing In Accumulator Charging Valve For Cartridge Groups
Carriage Rotate Pins Can Be Protected From Damage By Adding A Restraint Carriage Rotate Pins Can Be Protected From Damage By Adding A Restraint
Specifications Manual For 777D Off-Highway Trucks - Form no. SENR6911 - May 1996 Specifications Manual For 777D Off-Highway Trucks - Form no. SENR6911 - May 1996
Assembly Procedure For 777D Off-Highway Trucks - Form no. SEHS9997 - October 1996 Assembly Procedure For 777D Off-Highway Trucks - Form no. SEHS9997 - October 1996
Remanufacturing Water Pumps For The 3300 Family Of Engines Remanufacturing Water Pumps For The 3300 Family Of Engines
Some 9X-7803 Alternators Were Mislabeled As 8C-6163 Some 9X-7803 Alternators Were Mislabeled As 8C-6163
8I-3432 Brake Control Group And 136-8544 Service Brake Cylinder Group 8I-3432 Brake Control Group And 136-8544 Service Brake Cylinder Group