110-1511 Tube Assembly (Pump Drive Lube) May Crack And Leak Due To Vibration
Usage:
AGRICULTURAL TRACTORSCHALLENGER 45 (1DR) TRACTORS
Problem:
Some 110-1511 Tube Assemblies on Challenger 45 Tractors may crack due to vibration. The 110-1511 Tube Assembly, part of the 108-1916 Hydraulic Arrangement, supplies oil to lubricate and cool the implement pump drive gears with case drain oil. Failure of the 110-1511 Tube Assembly can cause pump drive damage and substantial loss of oil.
Solution:
A production fix is forthcoming. In the cases where failures occur, replace the 110-1511 Tube Assembly with a Hose Assembly using the chart and illustration for parts and routing.
Illustration 1
COPYRIGHT 1995 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Weak Steering On One Side Of Challenger Tractors Weak Steering On One Side Of Challenger Tractors
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Steering Wheel May Have An Offensive Odor Steering Wheel May Have An Offensive Odor
Available Reference Manuals And Software Update Revisions Available Reference Manuals And Software Update Revisions
Installation Of New Cylinder Port Thermocouples Installation Of New Cylinder Port Thermocouples
Circuit Breaker For the Air Conditioner Condenser Motor Circuit May Not Be Correct Circuit Breaker For the Air Conditioner Condenser Motor Circuit May Not Be Correct
Check Position And Condition Of Rear Brake Pipe Check Position And Condition Of Rear Brake Pipe
Circuit Breaker For The Air Conditioner Condenser Motor Circuit May Not Be Correct Circuit Breaker For The Air Conditioner Condenser Motor Circuit May Not Be Correct
Relocation Of Relay Panel Relocation Of Relay Panel
Screed Extender Support Bushings May Come Loose And Come Out Of The Frame Screed Extender Support Bushings May Come Loose And Come Out Of The Frame
Bolts Used To Mount Water Spray Pump And Support Assembly May Come Loose Bolts Used To Mount Water Spray Pump And Support Assembly May Come Loose
R-134a Refrigerant Leaks May Be Caused By Incorrect Seals R-134a Refrigerant Leaks May Be Caused By Incorrect Seals
110-1512 Tube Assembly (PTO Lube Line) May Crack And Leak Due To Vibration 110-1512 Tube Assembly (PTO Lube Line) May Crack And Leak Due To Vibration
Retaining Bolts That Hold The Fan Spider Assembly May Come Loose Retaining Bolts That Hold The Fan Spider Assembly May Come Loose
Implement Valve Signal Line May Crack And Leak Due To Vibration Implement Valve Signal Line May Crack And Leak Due To Vibration
Possible Interference Between The Lockup Clutch Hub Retaining Bolts And The Thrust Bearing Race Possible Interference Between The Lockup Clutch Hub Retaining Bolts And The Thrust Bearing Race
Front Suspension Cylinder Head Bolts Cannot Be Tightened Correctly If Too Much Silicone Sealant Is Used During Assembly Front Suspension Cylinder Head Bolts Cannot Be Tightened Correctly If Too Much Silicone Sealant Is Used During Assembly
Seat Tethers Field Information Seat Tethers Field Information
Unnecessary Replacement Of Hand Metering Units Unnecessary Replacement Of Hand Metering Units
Improved Shift Handle Requires Special Installation Procedure Improved Shift Handle Requires Special Installation Procedure
Seals Can Be Damaged When Removing Or Installing The Cut-Out Cartridge Valve From The Body Of The Accumulator Charging Valve Group Seals Can Be Damaged When Removing Or Installing The Cut-Out Cartridge Valve From The Body Of The Accumulator Charging Valve Group
Blowby Measurement For the Above Turbocharged Engines Blowby Measurement For the Above Turbocharged Engines
Front Upper Cylinder Bearing Cap Bolts May Be Too Long Front Upper Cylinder Bearing Cap Bolts May Be Too Long
Possible Failure Of 8X-5972 Steering Hose Due To Chafing On Sevice Brake Clip Possible Failure Of 8X-5972 Steering Hose Due To Chafing On Sevice Brake Clip