Before/After
| PRODUCT SUPPORT PROGRAM FOR REWORKING THE CONNECTOR FOR THE TORQUE CONVERTER FILTER BYPASS SWITCH ON CERTAIN 793F OFF-HIGHWAY TRUCKS |
1408
|
PS46196 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS46196" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The existing connector for the torque converter filter bypass switch can fail on certain 793F Off-Highway Trucks. If the existing connector fails due to vibration, it can cause false event codes indicating that the torque converter filter is plugged. |
Qty |
Part Number |
Description |
1 |
8T4190 |
BOLT-HEX HEAD |
2 |
9X3401 |
PIN-CONNECTOR |
2 |
9X3402 |
SOCKET-CONNECTOR |
1 |
9X8257 |
WASHER-HARD |
1 |
1160118 |
CLIP |
1 |
2042281 |
STRAP-CABLE |
2 |
3332101 |
BRACKET AS |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 14% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Rework the connector for the torque converter filter bypass switch. Refer to Special Instruction, M0098113, "Procedure to Improve Torque Converter Bypass Switch Retention on Certain 793F Off-Highway Trucks" for additional information. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-60000 hrs, 0-120 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 1.5-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|